Need blowhole pics

[Flip-Mode]

I'm thinking of cutting a rectangular blow holes for my rad on top of the case and I was looking for some pics of how they look with a grill on them.
What I mean is blowholes that are actually a square with the corners pushed in.

[Sleepy_Steve]

I dont understand what you mean by "Corners pushed in."

[Flip-Mode]

Sorry about the crap picture but its 3:30AM

http://img451.imageshack.us/img451/8882/fan8zj.gif

[baltoos]

I have a 120mm Panafloe pulling warm air out of the top of my rig:
http://img.photobucket.com/albums/v186/baltoos/New%20Comp/New1C.jpg

-Dave

[Flip-Mode]

Exactly what I was looking for but I wanted a round grill on top.
Thanks though!

P.S
You have a template for that?

[baltoos]

I just used a tape measure & straight edge to mark the top of the case with a pencil. I then masked off the area around the outside edge of the hole with blue Painter's Tape & cut it out with my Craftsman Rotary Tool ( similar to a Dremel). The grill is from scrap black expanded metal I had left over from a rain gutter leaf guard project. The case then got a light coat of gloss black paint to cover the exposed edges. It must work pretty well: with the other cooling mods( http://www.ocforums.com/showpost.php?p=2985524&postcount=2302 ) I've done, I see no difference in temps with the case open or closed.