What next?

[Wyno]

I started doing some moderate overclocking and I'm currently at 1491 on my 1.4. Current temps are at 43 idle and 48 full load with prime 95. Current settings are multiplier at 10.5 and fsb at 142. Should I take the fsb up some more or raise the multiplier? I definately have to keep an eye on the temps so not to go over 50.

[XprincoX]

Well if u can try raising the multplier as high as possible. But this also means more bandwidth through the bus. So you'll need to play around with to find a stable setting. But if its already running stable why mess with it. :D

[Wyno]

Well I would want to mess with it to get the most from it just like in your sig you are at 1610. I would like toget there but I have to get better cooling first and I know that. I was thinking probably take the fsb up a little more since I heard that o clocks the whole system. Doesnt the multiplier just up the cpu?

[XprincoX]

When u up the fsb or the multipler it basically overclocks everything on your computer. So your other hardware also plays a significant role in your ocing success. :D