Is anyone familiar with this board? It may also be an ASUS overclocking peculiarity (I am use to ABIT's SoftMenu). Anyway, for the D805 I set overclocking to Manual and set the FSB to 166 and set the memory clock to 333. However, during a memory test I noticed that the RAM is actually running over 400...since the memory is PC2700, it crapped out fairly quickly.
I then set the memory timing to DDR266. NOW it's running at 333. I was going to try and get the system to 4GHz using PC3200 RAM, but the system won't even post. I suspect that the memory timing is off, however setting it to some lower value still won't allow the system to post (I have of course adjusted the CPU voltage as well).
Any ideas? Are there some options I am missing in the BIOS?
I then set the memory timing to DDR266. NOW it's running at 333. I was going to try and get the system to 4GHz using PC3200 RAM, but the system won't even post. I suspect that the memory timing is off, however setting it to some lower value still won't allow the system to post (I have of course adjusted the CPU voltage as well).
Any ideas? Are there some options I am missing in the BIOS?