PDA

View Full Version : Mem voltage mod for ak31

Luie
11-18-01, 11:22 PM
Is there such thing as a mem voltage mod for ak31 rev. 3.1?
The max you can do in bios is 2.7V....

btw, is there a bios for ak31 rev 3.1 that enable you to set the fsb to more than 166?
I think 166fsb is too little...
!!tio!!
11-22-01, 07:03 AM
I don't think so.. let see
!!tio!!
11-22-01, 07:04 AM
Well... No theres no modd...
Luie
11-23-01, 03:14 AM
STOP SWEARING EDMUND!!!!
AND THAT IS NOT KOREAN!!!
YOU ARE SWEARING IN CHINESE!!!

MODERATORS!!! GET HIM OUT OF THIS FORUM!!!!
!!tio!!
11-23-01, 03:59 AM
Theres no swearings...
Luie
11-23-01, 05:44 AM
ASK A CHINESE THAN!!!
THEY WILL SAY YOU ARE SWEARING!!!

mODERATORS!!! ATTENTION!!! aTTENTION!!!
!!tio!!
11-23-01, 05:47 AM
Mr. Modd.. see anything??
SickBoy
11-23-01, 01:05 PM
A memory voltage mod would be highly impractical, seeing as there's no way to know what your voltage actually is, other than what the BIOS sets it to. You'd need to rig up some kind of multimeter setup to be safe. The reason modding the vcore for a CPU works is because we can tell what it's being set to, through MBM or the like.

SB
Luie
11-23-01, 08:09 PM
Ok, thanks.

btw, can we swear in this forum?:eek:
Maximus Nickus
11-30-01, 02:39 PM
I should think not!
Luie
11-30-01, 06:33 PM
I agree.
Maximus Nickus
12-01-01, 04:52 PM
Hey Luie what would your cpu speed equate to? 1900+ etc?

What was its default?
Luie
12-02-01, 07:40 AM
The default of the CPU is 1600+ (1.4Ghz).
Now it is 2000+ (1.743Ghz)

Cool, eh?
Stepping is AKGKA Y!
:D :D :D

And the Windows XP boot up time is always less than 20 sec!!!
(usually 18sec)

And the shut down time is less than 5 sec!!!
(usually 4 sec)

Now, I am searching for a cool game to play on my cool pc.
:D :D :D
Maximus Nickus
12-03-01, 02:02 PM
Imagine wat a PC wif a 60gig 15'000RPM ata 366 scuzi drive would be....
Alex99
12-03-01, 02:22 PM
Originally posted by luie
ASK A CHINESE THAN!!!
THEY WILL SAY YOU ARE SWEARING!!!

mODERATORS!!! ATTENTION!!! aTTENTION!!!

What the hell are you talking about, what swearing !??
killem1x1
12-03-01, 02:50 PM
If someone is swearing, it doesn't matter in what language, it will not be tolerated.
Luie
12-04-01, 05:21 AM
to alex99,
he had edited his swearing post. so that's why you can't see it.
anyway, no swearing allowed in this forum.
Maximus Nickus
12-05-01, 12:11 PM
Ok enough, you can swear in *'s, ie: s***. OK?
Now enough of this, close this thread.