Need some help with a duron O/C PLZ

[kieran_d]

I have a Duron 750, and it will run rock stable at 900 (100x9). But at 750 the temps are about 42 full load, and at 900 the temps are they are about 48 at load, how much higher in temps can i go, as i want to hit 1000 with it, and what voltage is to high (ie... to risky) i am thinking of getting a 1.3g t/brid in a week or two, so not to worried about killing the chip, but i am worried about the board, is their much change of the board dieing, thx alot

[Tiger]

The only way you are going to find out what temps the system is stable at is difficult to say as readings differ from mobo to mobo depending on the position of the thermistor. I would say that you are on the limits now with your current cooling. You will probably get 1G from the 750 at 1.85V vcore but the cooling is going to have to be good. I wouldn't worry overly about the mobo.

[The Coolest]

What is your voltage @ 900Mhz?

[JAWS]

Can you run your system at 133 FSB?

[Dunga Bee]

If your cooling is decent you can just close the L7 bridges and you should be able to top 1GHz no problem. I had my 750 up to 1035 before I chipped the core :( .

Good luck.