- Joined
- Jan 4, 2005
- Location
- Vancouver, WA
I've just recently obtained one of these beasts, and I've got a truck load of problems with it!
I'm running it with a 360w 24pin ATX Antec PSU
2x SL2HA PII ~300MHZ slot 1 Cpus
some SD ram
Planning to use this rig to host a bunch of hard drives. (3 or 4 IDE, and a couple SCSI).
The main road block I'm seeing right now is that the board doesn't appear to be reciving power from the PSU when I plug the P1 connector into the 24pin on the motherboard, but when I plug it into the 20pin labeled "reserved" by the manual and labeled J6G1 on the motherboard it appears to get power when I hit the power sw. But the board doesn't post when I do that, it just recieves power. (CPU Fans/etc come on)
I took the CPU's out of a different PII system that was working, so it can't be the CPU's so is there something I'm missing or is the board kaput?
I'm running it with a 360w 24pin ATX Antec PSU
2x SL2HA PII ~300MHZ slot 1 Cpus
some SD ram
Planning to use this rig to host a bunch of hard drives. (3 or 4 IDE, and a couple SCSI).
The main road block I'm seeing right now is that the board doesn't appear to be reciving power from the PSU when I plug the P1 connector into the 24pin on the motherboard, but when I plug it into the 20pin labeled "reserved" by the manual and labeled J6G1 on the motherboard it appears to get power when I hit the power sw. But the board doesn't post when I do that, it just recieves power. (CPU Fans/etc come on)
I took the CPU's out of a different PII system that was working, so it can't be the CPU's so is there something I'm missing or is the board kaput?