oh crap,, lost some MB

[ymNA]

hm..just did a volt mod and able to brought my cpu to 1027 (158 x 6.5) @ 1.95v.

But the problem is, one of my module lost like 125mb, windows report my module has only 131mb. Did I burn the ram? Maybe I got the cpu voltage too high? (tested @ 2.2v for about 40 minutes) helppp!!!

[eh?]

i don't think you can burn only half of your memory on 1 stick and still have the other half work... make sure you have it pushed in the slot all the way... or try just that one stick alone....thats all i can think of

[Warlord2]

Ive never heard of anyone doing this

try going back to default to see if you memory comes back

I think a 256mb stick is just 2 128 megs put together so I guess you could of burned one side of the stick

[13oots2]

When running a stick of PC133 CAS#3 at CAS#2 at a high FSB I would lose 64Mb on occasions. Just pushing the memory too far was causing 64Mb to fail.

[oc jason]

ya sometimes that does happen, i sold my old pc100 to a buddy and wen he got it it saw it as like 96mb of ram instead of 128, it ever got fixed

[ymNA]

that happen only to one stick, the other is fine with the oc, and I tried with default speed, still the same. thanks guys