Help with RAID

[Str0be]

Ok, all the info is in my sig, if you need any question feel free to ask.

I'm trying to figure out how to put the 2 320's in RAID0.. Is there any way I can get a step-by-step type help, or some information provided on how to get This mobo to detect both drives as RAID0?=(

[shadowdr]

you will need to enable raid in the bios first, it is also likely that you will need to select sata or scsi in boot priority. You will need to connect drive to first two sata ports (0 and 1 or 1 and 2).Done correctly you will see nvidia raid bios during boot. Press appropriate keys to enter raid bios. Here you select the type of rad and set them up. Be sure you have the Nvidia raid driver on floppy and press F6 as soon as windows disc boots. It will ask later if any additional drivers are needed press s and insert floppy and enter chose driver for your OS and allow windows to complete install, it may ask to reinsert floppy later (do so).

This is generic setup as i do not own any biostar, but should help you get the basics.

[nikita@quebec]

your right and you need to format your hard drive is you change your system from non-raid to raid.. you dont have choice