My 1600xp wont run at 133 either

[Indiglo]

I have a ECS k7s5a mobo with the athlon 1600xp and it wont boot up at 133/133. need some ideas if possible. have ddr2100 ram from crucial
HELP :(

[]-[itman]

not familiar with your mb. Try looking it over and see if there are any jumpers.

[Rcoe]

Indiglo I am having the same problem with my xp1900+. When I set the jumper on my epox 8KHA+ to 133 no boot, 100 works fine.

I put a t-bird 1.4 in the same setup works fine at 140fsb. I am beginning to think I have a bad cpu:(

Let me know if you find anything out.

good luck

[Indiglo]

i am starting to lean towards a new h/s fan...its doing alot of locking up more then anything so hopefully a new and improved h/s fan will solve my problems, i will let you know later on today if it worked or not

[Rcoe]

What are your temps like? If they aren't high I don't think a new heatsink/fan will help, although extra cooling is always a good thing. My temps are low 38c idle and maybe 44c under load for a while.

[Indiglo]

My temps in my bios was 51 under no load...just sitting in bios...lol

[sneakyfart]

try flashing the bios

[Indiglo]

already done