- Joined
- Aug 8, 2002
Hey guys, i just got my order of stuff in and i have it all put in and what not.
ab9 pro
e6300
2x1gb patriot 667
bfg 7600gt
seagate 7200.10
maxtor diamond 10
Ultra x-connect 500w
water cooled with a WW/eheim 1250/and too small of a rad.
Anyways...
I go and try to install windows xp. I tell it to use the intel sata drivers that came on the supplied disc, and when it gets to the part where it says "Preparing to start windows" on the bottom of the status bar, (before you format or anything), i get a BSOD..... it says
"Check for visuses on your computer remove any newly installed hard drives or hard drive controllers. Check hard drive to make sure it is properly configured and terminated..."
STOP: 0x0000007b (0xf78e63c, 0xc0000034, 0x00000000, 0x00000000)
I have tried to use both hard drives and it does it to both of them. I have even tried to use my trial version of server 2003 enterprise edition (just opened so there are no scratches on the disc or anything). I have tried 2 different windows XP CDs and it still gives me the problem.
I have reseated the hard drives many many times. I went in the bios and changed the intel sata from "IDE" mode to ACHI (cant remember if that is the acronym or not). When i do that and i forget to tell it to use the intel thing, it gets past the part, but then it says that i have no working hard drives to install windows on.
I have tried all 3 different sata controllers and different ports within each port...
I am not sure what bios im running, i think the date is 8/9/06, i have not updated it, it is stock. I have no way of getting a floppy or cd made for a newer version right now...
Are there some things i am missing? This is really ****ing me off, i have spent all damn day trying to get this working and i keep getting slapped in the face...
The thing that really ****es me off is that i have my old windows installed on the maxtor drive (upgraded from an amd xp2500+) and i was actually able to boot all the way into windows. I couldnt really do much, but i was able to log in and look around the drive and to open a txt file and picture. I am running out of things to try, any advice would be great.
Sorry for the long post
ab9 pro
e6300
2x1gb patriot 667
bfg 7600gt
seagate 7200.10
maxtor diamond 10
Ultra x-connect 500w
water cooled with a WW/eheim 1250/and too small of a rad.
Anyways...
I go and try to install windows xp. I tell it to use the intel sata drivers that came on the supplied disc, and when it gets to the part where it says "Preparing to start windows" on the bottom of the status bar, (before you format or anything), i get a BSOD..... it says
"Check for visuses on your computer remove any newly installed hard drives or hard drive controllers. Check hard drive to make sure it is properly configured and terminated..."
STOP: 0x0000007b (0xf78e63c, 0xc0000034, 0x00000000, 0x00000000)
I have tried to use both hard drives and it does it to both of them. I have even tried to use my trial version of server 2003 enterprise edition (just opened so there are no scratches on the disc or anything). I have tried 2 different windows XP CDs and it still gives me the problem.
I have reseated the hard drives many many times. I went in the bios and changed the intel sata from "IDE" mode to ACHI (cant remember if that is the acronym or not). When i do that and i forget to tell it to use the intel thing, it gets past the part, but then it says that i have no working hard drives to install windows on.
I have tried all 3 different sata controllers and different ports within each port...
I am not sure what bios im running, i think the date is 8/9/06, i have not updated it, it is stock. I have no way of getting a floppy or cd made for a newer version right now...
Are there some things i am missing? This is really ****ing me off, i have spent all damn day trying to get this working and i keep getting slapped in the face...
The thing that really ****es me off is that i have my old windows installed on the maxtor drive (upgraded from an amd xp2500+) and i was actually able to boot all the way into windows. I couldnt really do much, but i was able to log in and look around the drive and to open a txt file and picture. I am running out of things to try, any advice would be great.
Sorry for the long post