Just grade my mod!... CLiCK n Grade... 30 sec... only!

[!!tio!!]

Look at the pic!

[Crash893]

mabey move the to hdd into the blank spots

or move the water up to the blank spots

unless its a heat thing

i just wouldnt like my hdd near a pump with a magnet in it

[!!tio!!]

Originally posted by crash893
mabey move the to hdd into the blank spots

or move the water up to the blank spots

unless its a heat thing

i just wouldnt like my hdd near a pump with a magnet in it

u mean this??

[Crash893]

yea

where is the radator ( edit: DOH! i just found i)

its late mabey im just blind

im pretty sure the psu blows out

check though i got a couple degrees drop when i relized my front fan was blowing out and my back fan was blowing out

after i reversed one the temps went down alot

[!!tio!!]

umm.. what if a put a piece of thin plastic inbetween the psu n rad??

[Crash893]

Cut a blow hole at the top ( theres is an artical on the overclockers webpage)

[Crash893]

im sure you can mess with the direction of your fans

but here is another idea

[!!tio!!]

so the radiator fins have to face the top and bottom instead of front and back...

but that will produce noise.... my whole point was... put it in the case to lessen the noise... wat about this?

[!!tio!!]

Hey then I will need like 3 fans min above....! have u even see my radiator b4?? theres fan attach... (but is unscrewable which i m doing) i found out that ifthe length between rad n fan is over 4 com, it won't work....

[Crash893]

the radator by the psu might not be very effishant

mabey move it to where the pump is and reverse the fans to blow out

then move the pump to the same level as the resivoire ( mabey make them a joint combo)

[Crash893]

like this

[!!tio!!]

Is this good? get a big tower!

5 CDROM spaces right? good! use 3 blanks for reservoir and 3 spaces for PSU maybe 1 for radiator n 1 for PSU n 1 for Fan PSU

and Hardisk and fans can keep as default places..


BY THE WAY... RECOMMEND A CASE PLEASE (not 2 expensive)

[Crash893]

im the wrong guy to recomend a case

if i was doing it i would just find used computer shop and find the bigest uglyiest tower they have ( for some reason they made them huge back then)


but thats just me

or get one of these cube radators
http://www.dangerden.com/images/super_cube/both_large.gif


http://www.dangerden.com/test/mall/radiators.asp

[!!tio!!]

Another modd... grade this too!

[Warlord2]

get a full tower

when watercooling after 3 cases and tons of mods I have found it is ALWAYS nice to have a full tower

the supercase is a cheap full tower case that I have and have liked it

you dont want the eheim by the hard drives ( I have found out the hard way:( )

in a full tower you can put both your radiator and pump on top portion of the case where heat wont mater

[Taylor]

Originally posted by !!etomac!!


BY THE WAY... RECOMMEND A CASE PLEASE (not 2 expensive)

I recommend Antec, lots of good products reasonable price. ($90-$150 for what you're looking for. Lots of room, built for good cooling, easy to mod w/ right tools. (dremel, nibbler, files. Comes with good PSU. Available in various stores like Fry's or online.

Lian Li makes expensive works of art. I would never recommend against them, but I would say to be sure of one's needs before purchasing any work of art. One day I will own a Lian Li, no question, but maybe not today or tomorrow.

[JML]

the 4q fulltower is cooooooool - www.abilitywholesale.com, the psu isn't the greatest though, and the case is a little on the thin side.

[drunkmonkey]

Hey, just a lil input frum me, Tigerdirect.com sells super-cheap cases that are preatty good,
Nice watercooling job!!!:D