Pencil mods

[meionm]

So recently I pencil mod vdroop on my asus p5b deluxe. I know this not the best way to do but it is the easiest. I wondering what the best way to preserve that mod for longer time so it won't degrade. I was thing about applying something over it, like small piece of tape. Any ideas?

[nvidiaOCmaster]

Break a bit of the lead in between the 2 pins, it should be pretty permanant then.

[four4875]

what if that yields too low of a resistance, or the pencil mod happens to be across a resistor and not between a couple pins?

i really dont know how you can proect it without affectin the resistance, i would try on some old pcb, pencil a resistor, change and note it's resistance, then try covering it with various stuff like glue and tape, see if they affect the mod.

[Moto7451]

You could use RTV silicone. Thats what I used to protect my volt mod on my X800GTO. It works really well. I used solder but it will work for pencil also.

[lorax26]

Do you have a tutorial for the pencil mod on p5b deluxe?

[CrazyIrish]

Some clear nail polish should work.