- Joined
- Sep 22, 2006
- Location
- Orlando, FLA
Is there a way to manually set the strap to 1333 on a P5B DLX so I can boot into the 1333 strap?
See my sig. for my current settings - I'm trying to get a little higher and I'm having real trouble at anything over 508FSB.
At lower muti's and ram set at spd the bios auto sets the 1333 strap and I can run the FSB and ram (on a divider) quite a bit higher but bios alway reverts back to the 1066 strap when I'm on the 8 multi.
I rigged a small fan onto the NB last night and was able to boot into windows at 521 x 8 1:1 5-5-5-13-42 (max volts NB,SB,MCh) but as soon as the room warmed a little it became unstable and froze up.
But the board was on the 1066 strap (I know this because at post it shows the RAM as PC-4300 on 1066 and PC-5300 on 1333) and I know there would be less stress on the NB if I could get it to loosen up.
Anyone have any Ideas?
Avman
See my sig. for my current settings - I'm trying to get a little higher and I'm having real trouble at anything over 508FSB.
At lower muti's and ram set at spd the bios auto sets the 1333 strap and I can run the FSB and ram (on a divider) quite a bit higher but bios alway reverts back to the 1066 strap when I'm on the 8 multi.
I rigged a small fan onto the NB last night and was able to boot into windows at 521 x 8 1:1 5-5-5-13-42 (max volts NB,SB,MCh) but as soon as the room warmed a little it became unstable and froze up.
But the board was on the 1066 strap (I know this because at post it shows the RAM as PC-4300 on 1066 and PC-5300 on 1333) and I know there would be less stress on the NB if I could get it to loosen up.
Anyone have any Ideas?
Avman