WaTTz'z 6700ES

[wa77ss]

Just got this chip in a few days ago (thanks El<(')>Maxi) .... :bday:

CPU - 6700
Motherboard - Asus P5W DH 975X
RAM - 4 * 512MB Teamgroup PC2-5300 3-4-4-8 "D9GMH"
PSU - PC Power & Cooling 510W

Air cooling results ~ XP-90c w/ 92mm Panaflo

3450MHz -
http://img154.imageshack.us/img154/2791/superpimod001mediumyx0.jpg (http://imageshack.us)

3550MHz -
http://img157.imageshack.us/img157/1586/superpimod002mediumiz6.jpg (http://imageshack.us)

3600MHz - 1.55v (BIOS)
http://img155.imageshack.us/img155/6831/superpimod003mediumxf2.jpg (http://imageshack.us)

3630MHz - 1.55v (BIOS)
http://img166.imageshack.us/img166/6585/ss001dx7.jpg (http://imageshack.us)

----------------------------------------------------------

Coming soon, modded prometia mach I ;)

Thanks for looking :)

[dominick32]

Nice results Wattz. Cant wait for the single stage phase unit!!! I am definitely looking forward to your results and admittance to the 4ghz club. :bday:

[wa77ss]

Nice results Wattz. Cant wait for the single stage phase unit!!! I am definitely looking forward to your results and admittance to the 4ghz club. :bday:

Thanks man.

Im debating whether or not to give it 1.7v (BIOS) and let her rip :p

[hUMANbEATbOX]

Thanks man.

Im debating whether or not to give it 1.7v (BIOS) and let her rip :p

why not? it should only give you 1.65v as read in windows, probably close to 1.63v real as read by a dmm.

if i had phase, i would not hesitate to use up to 1.7v read with a dmm. this of course would require some mods. ;)

[dominick32]

why not? it should only give you 1.65v as read in windows, probably close to 1.63v real as read by a dmm.

if i had phase, i would not hesitate to use up to 1.7v read with a dmm. this of course would require some mods. ;)

X2 Wattz.

The P5B undervolts like a mofo. With a 1.7 selection in the bios I get an actual of 1.625 that droops to 1.57 under load. You should be absolutely fine with a 1.7 selection. Just check hardware monitor before booting up XP.

[dylskee]

Looking good WaTTz! :beer: Can you run that TeamGroup @1:1 with those timings? So far I'm running my E6600 @3.2GHz TeamGroup memory @1:1 3-3-3-8 timings, so far It's 2-1/2 hours orthos stable.

[Epox4life]

X2 Wattz.

The P5B undervolts like a mofo. With a 1.7 selection in the bios I get an actual of 1.625 that droops to 1.57 under load. You should be absolutely fine with a 1.7 selection. Just check hardware monitor before booting up XP.
Thats weird before any mods my P5B-D did 1.64v and drooped to 1.62vcore. I heard it depends on how you have your mosfets cooled.

[hUMANbEATbOX]

Thats weird before any mods my P5B-D did 1.64v and drooped to 1.62vcore. I heard it depends on how you have your mosfets cooled.

WOW was i close, purely a guess too!

[wa77ss]

Ya, 1.7v on air isnt going to happen :p

Just got core temp installed, and with my xp-90c its giving me a 75c load @ 3ghz w/ 1.4v :eek:


1.65v @ 3600mhz + = askin for trouble.

Once I get some neoprone, Ill have no hesitation :D

This RAM aint to bad, just wish I had bought 2 x 1g sticks instead :(

[xTrEmEoVrClOcKr]

Good results so far. Make sure to get in cooler ambients, that's when you go for 1.65v ;). My temps were 47c idle / 65c load @ 1.65v w/ 59f ambients blowing into my case.

[PWatterson]

If can't really wait, you could always take the computer outside in the dead of the night when it is cool and let her rip there. :D

Nice results though, can't wait to see you push it farther.

[xTrEmEoVrClOcKr]

Yep, I got my highest OCs with this setup:

http://img.photobucket.com/albums/v392/xtremeovrclockr/bench2gg.jpg

Could run 1.65v all day baby :D.

[M Diddy]

How are you running the 2:3 divider on the P5W??? I have problems (random no POST) just running mine at a 4:5 and can't get squat at 2:3. I am DYING to stetch out the legs on my HZ's.....

[wa77ss]

How are you running the 2:3 divider on the P5W??? I have problems (random no POST) just running mine at a 4:5 and can't get squat at 2:3. I am DYING to stetch out the legs on my HZ's.....

Ummmm .. Ill check what version BIOS I have tonight. I honestly dont know, I just set it and it works ...

2.4v on the RAM

[dogbert_2001]

Yep, I got my highest OCs with this setup:

http://img.photobucket.com/albums/v392/xtremeovrclockr/bench2gg.jpg

Could run 1.65v all day baby :D.

Aren't you worried racoons will come and chew your wires?

59F - isn't that like winter to you Californians? How can you sit in that?

[xTrEmEoVrClOcKr]

Not to thread jack, but 59f is "In the middle". It usually gets into the 30s / 40s at night (During winter) but lately, 59f is the coolest I've seen it :(. This isn't my 24/7 setup, only benching. I'm not worried about small animals chewing up my wires, any human / animal should be intimidated by the 141CFM EFB1212SHEs LOL :D.

[wa77ss]

3750MHz - 4:5 4-4-4-4

http://img381.imageshack.us/img381/807/ss007fa4.jpg (http://imageshack.us)

I saw 90c !!!!! :eek:

1.7v

[El<(')>Maxi]

Jesus LOL, don't kill that chip if you can help it :D

Nice time there Watts!

[xTrEmEoVrClOcKr]

Probably 1.65v actual, still pretty warm though :D. Was 90c through SPI1m? If so, TONE IT DOWN A BIT, IT'S STILL AN ES LOL.

[wa77ss]

Minor update :D

4050MHz 1.650V (bios)

http://img143.imageshack.us/img143/9003/ss031yc1.jpg (http://imageshack.us)


Not to shabby, had the phase running for about 30mins or so now on zip ties :rolleyes:

Froze right at 4100mhz, but def can get it no prob with more volts :)

[El<(')>Maxi]

It will do more with better mounting no doubt, you can't really get any decent pressure with zip ties. Good job on the temp mount!