View Full Version : How high can your C2D mobo's FSB go?
10-11-06, 04:50 PM
i have been seeing insane FSB speeds on both the Gigabyte DS3 and many ASUS boards out there and i wanted to make a chart of the various boards to see which are fastest both with and without mods.
format is as follows:
Mother board - (full name please not just DS3 or something the brand and model)
FSB - (this is the MAX stable speed not your suicide run) and misc. voltages
CPU - and voltage /temps
RAM - (please list stock speeds/volts/timings and also what you run it at)
Cooling - (list CPU and motherboard cooling)
Mods - if any
Limit - what you think is limiting your OC ie. RAM, CPU, cooling, PSU, MOBO
10-11-06, 08:01 PM
motherboard= Abit AB9-PRO
cpu=e6400 (bios cpuv-1.375'1.33-1.35') no temps taken
ram=ocz gold ddr2-667 firstname.lastname@example.org oced ddr2-794 email@example.com
10-11-06, 08:07 PM
Motherboard: Asus P5N-SLI
FSB: 244FSB @ 1.43V @ 3.4ghz
RAM: Samsung OEM PC2-3200 3-3-3-12 @ 2-2-2-12
cooling: Thermalright Ultra 90
mods: Sinked up board
CPU: Intel Pentium 4 520 @ 2.8(sstock)
Limit: Nvidia chipset
10-11-06, 08:40 PM
MOBO - Asus P5W DH
FSB MAX = 435 @ 1.85MCH voltage in bios
CPU = E6600 @ 1.55v @ 3.915ghz (435 x 9) cant remember temps but were
less than 55*C in TAT @ load
RAM - Gskill DDR2 800 "HZ" stock 4-4-4-12 suggested 2.0-2.1 runs stock @ 1.8 no prob. ran at 1:1 @ 435fsb so 870mhz @ 4-4-4-12 @ 2.1 (didnt want to have any doubt it was the ram although it will do 4-4-4-12 @ 1000mhz @ 2.1v)
Cooling - CPU = Ultra 120 w/ Yate loon 47cfm fan... MOBO = chipset with AS5 cover off and misc 40mm fan mounted on main chipset hs.
Mods - only chipset cooling but it was just an added fan... no after market stuff... the stock heatsink is a VERY good cooler when mated with a 40mm fan even if the fan is running very very slow)
Limit = chipset.... i should vmod the MCH so i can hit 4ghz!!!! or mabey i should just go grab a DS3 from frys... pop in my cpu do 4ghz and then take the mobo back. :beer:
Motherboard: Asus P5B Deluxe/Wifi-AP
CPU: Intel C2D E6300 @ 3.26 1.38v
RAM: OCZ Gold EL DDR2-800 5-5-5-10 @ DDR2-930 4-5-4-10 1:1 2.1v
Cooling: Swiftech Apogee/BIP2/MCP250 - 7 120 fans inside a stacker 830 :p
Limit: This chip has alot more in it but my ram is limiting me.. maxed it out already.
10-13-06, 03:22 PM
come on people i know a lot more of u have C2Ds. It takes 2 seconds to fill this out just do it.
10-13-06, 08:12 PM
Motherboard - Asus P5B-Deluxe
FSB - 564mhz, SPI 32M stable
CPU - 1.84vcore, Stock Vapochill LS
RAM - G.Skill HZ's PC2-6400, 2.64vdimm @ 4-4-4-4
Cooling - Vapochill LS, HR-05 on the NB, couple 120mm fans, no case.
Mods - vdimm and vcore
Limit - CPU internal FSB.
Edit* Once I get this back in a case and start running 24/7 again i'll add some more results.
10-13-06, 08:31 PM
I was feeling pretty good about myself til Epox joined the mix... I was about to TAKE OVER. But for somebody that ain't got no Predator Bone Marrow... I can hold my own.
Motherboard - Gigabyte GA-965P-DS3
FSB - 520mhz, Orthos for people that work stable
CPU - 1.425vcore on CHEAP water. We're talkin gas station bathroom water
RAM - Corsair XMS2-6400, 2vdimm @ 5-5-5-12
Cooling - Evercool WC-202
Mods - Baby I got a tuxedo, long hair, my own TV show, and a new sexy cohost
Limit - I've got a mezanine so I can only fit so many women in the bed...
10-14-06, 03:52 PM
in the future please don't fill in mods and limit section while drunk or high
10-14-06, 05:05 PM
Mother board -
Copy and paste the above..
Mother board - p5b-d wifi
FSB -firstname.lastname@example.org 2.10vdimm 1.65nb 1.7sb
CPU -6400 wk 25 email@example.com depending on ambient temp, 42/55c
RAM -2gigZ OCZ 6400 plat. rev.1 4,4,4,15 2.10v
Mods -Lots of fans.
Limit -fear, don't want to pump more volts into my cpu.
10-14-06, 06:46 PM
What CPU? and speed
10-15-06, 12:17 AM
Mother board -Asus P5B non-DLX straight vanilla people
FSB - 450
CPU - e6300 (7*450=3.1)
RAM - G skill 2*1024 6400 cas5 but I'm running at cas4, these aren't HZs
Cooling - Stock
Mods - None
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.