OPB Completed 8m and 32m WR for whole set pi & 5.7G x6800 WR

[Onepagebook]

well, even though I kinda sick, but I do what I promise to do..


** Completed WR for whole set of Super pi mod 1.5

Here is the 8m set.
some pics are what I took for orlando , Phase and SLI-Dog :ocx14:
I gotta get it going, some pics about LN2 , I will post later,


http://www.ocxtreme.org/onepagebook/8mwr55g/8mwr01.jpg

http://www.ocxtreme.org/onepagebook/8mwr55g/8mwr02.jpg

http://www.ocxtreme.org/onepagebook/8mwr55g/8mwr03.jpg

http://www.ocxtreme.org/onepagebook/8mwr55g/8mwr04.jpg

http://www.ocxtreme.org/onepagebook/8mwr55g/8mwrwin.jpg

http://www.ocxtreme.org/onepagebook/8mwr55g/8mwrcv.jpg

************************************************** ****************************************

[Onepagebook]

32m WR done..it's very hard to win over Omega -san's Great Skill...really hard, I can truly tell you this.

here you go, my wish finally completed!!

32m , I got more time to take pictures but still no hands though

middle of running

http://www.ocxtreme.org/onepagebook/opb32mwr/32mwr01.jpg

http://www.ocxtreme.org/onepagebook/opb32mwr/32mwr02.jpg


completed!!

http://www.ocxtreme.org/onepagebook/opb32mwr/32mwr03.jpg

http://www.ocxtreme.org/onepagebook/opb32mwr/32mwr04.jpg

windows captured

http://www.ocxtreme.org/onepagebook/opb32mwr/32mwr.jpg

cpu verified

http://www.ocxtreme.org/onepagebook/opb32mwr/32mwrcv.jpg

finally, broke 5.7ghz for x6800

http://www.ocxtreme.org/onepagebook/opb32mwr/5705wrcv.jpg


Thank you all for those who always support me.

I will soon play some 3dmark.:)

[CCUABIDExORxDIE]

completely insane OPB. congrats!

[ziggo0]

:drool: :drool: :drool:

[nd4spdbh2]

:drool: <--- Nuf said

and to think i feel as though that my e6600 stock has too much cpu powa (well you really cant have enough) BUT 5.7GHZ!!! MY GOD

Also is there a reason for PCI gfx and PCIe raid card?

[nikhsub1]

Very nice indeed OPB!

[MadMan007]

Yeah nice that's some hardcore stuff :) Do you boot with those settings in BIOS or is everyone clock-gen'ing up to them in order to keep on the better memory straps?

Also is there a reason for PCI gfx and PCIe raid card?

My guess would be
-PCI graphics, less power draw than through the motherboard PCI-E circuits
-PCIe disk controller, less chance of corruption or failure due to onboard controller voltages (he's probably running pretty high voltage through the NB and SB)

[Onepagebook]

yes, it's promise super trak 4 ports sata

I can boot from bios @ 13x420;that 's for the OC just freq.
pi, I all boot from 12x438

here are the insulation pics:

you need to be aware of the spaces around the s775 area are kinda narrow and hard to get them flat.
so be careful for this.

http://www.ocxtreme.org/onepagebook/1026ln2/1026ln201.jpg

the place where easy to ignore is here. so make sure all the way sealed.
so your ram and mobo won't messed up and so you also can let your ln2 bench last longer.

http://www.ocxtreme.org/onepagebook/1026ln2/1026ln202.jpg

http://www.ocxtreme.org/onepagebook/1026ln2/1026ln203.jpg

here because we have the vcore measurement point and also the mosfets,
so the insulation tape had better just cover half

http://www.ocxtreme.org/onepagebook/1026ln2/1026ln204.jpg

you also need the smaller dewar

http://www.ocxtreme.org/onepagebook/1026ln2/1026ln205.jpg

and here is finall preparation job I set, depends on personal.

http://www.ocxtreme.org/onepagebook/1026ln2/1026ln206.jpg

here are two pictures about the works after...haha

http://www.ocxtreme.org/onepagebook/1026ln2/1026ln207.jpg

http://www.ocxtreme.org/onepagebook/1026ln2/1026ln208.jpg

[crfracer290]

ehh Aman could do better...

LOL JK, SWEEET!

[CCUABIDExORxDIE]

Also is there a reason for PCI gfx and PCIe raid card?

pci graphics is used cause it uses less system resources, allowing for higher speeds to be hit and lower times at those speeds.

and pci-e raid card is to give better speeds and keep corruption down.

[hUMANbEATbOX]

WOW!!!! :beer:

thank you so much for posting this here OPB!

[Gautam]

Heh, the WR's just keep falling eh. :) That 5.7GHz shot is just insane.

I see you switched to the P5W64, I guess a new 1M time is on the way too. Should be no trouble if you can 8M at 5520. :eek:

[Onepagebook]

Heh, the WR's just keep falling eh. :) That 5.7GHz shot is just insane.

I see you switched to the P5W64, I guess a new 1M time is on the way too. Should be no trouble if you can 8M at 5520. :eek:


Yes Sir:santa:

I still got about 14 L LN2...let's hope I have luck to hit that new mark;
but I probably will dig in 3dmark for upcoming week or 2.

Thanks a lot for all you guys nice warm words.:)

[Joe Camel]

:drool: wow wow wow :drool:

the spirit of Captin Insano is with you :)




cant wait till you (we) get our Rev3 copper MousePots

MM said they might be done this week but it looks like it'll be next week. :(

funny that both of them are going to Ohio


cant wait to see more from you :beer:



PS
i might just have to make that 2 hour drive south and get an "in-person" LN2 lesson from you.

[Onepagebook]

ha, he said he will send that asap:D
thanks buddy

[El<(')>Maxi]

Big congrats OPB, that is a huge milestone you have done. If you get some help to run 3D(or not), the numbers should pretty much be devestating if all goes well. Pair this with 8800GTX and there will be no looking back.

[benbaked]

Wow that is incredible, 9m!, good job indeed! :thup:

[Phrenetical]

massive congrats opb, you got the trifecta on PI.

[greenmaji]

Incredable work OPB, congrats :beer: