Anyone using Antex sx1030 or later....?'s

[oc jason]

Well im pretty much decided on the sx1030b case, with NO PS. Just wanted to know what kind of temps you are gettting in the case, wether or not you have just stock fans or modded with extra fans. I dont wanna mod this case yet, maybe jsut a top blowhole. So im just wanting some temp estimates for that case useing stock fan placement. Ill use stock placement, and a Glaciator 2 HS. But i will upgrade the fans to 4 80mm 47cfm panaflo's. But that may be it for now

[The Overclocker]

i have one, i am really imperssed with the case and i think it was worth every penny. i bought it for modding though and as a waring the steel is 3mm thick and burnt out my prinz 2000, i now have a very impressive black and decker. i modded the case to take 3 120mm fans, 2 in the top to cool my radiator and one in the front, unfortunatly you need to take out the 2nd hard drive carrier to fit a 120mm fan on

[rUfUnKy]

I would definitely recommend this case. The first thing that caught my eye was the placement of the power supply compartment, it only drops down 5" which leaves 15" of pure air flow!!!!ALOT of the cases I've looked at don't have nearly that amount of clean air flow...I added two case fans to the supplied fan brackets for a total of four and will be adding a blow hole.But even stock, it makes for a very good overclockers case..

[mujgy]

with mine i have the two fans down in front blowing in and the temp is 22 degreees C. of corse my room temp is about 20 degrees so that helps, but it really doesn't ever get much above ambiemt temp.