- Joined
- Sep 15, 2001
I have a 975x AW9D-MAX and it has this nice little BIOS feature that allows for fan adjustments around any monitored temperatures. According to how you set it it will run your fan from 7.5v all the way up to 12v. I have all my case fans wired up to a rehobus in the front and all are reasonable speed slower fans. The two 80mm in the front are wired together and are rated at .21a (2.5w) for a total of .42a (5w) the two in the rear are the same and my two 120mm low speed 3blade delta (HERE) on the radiator are rated on the fan hub at .24a (2.9w) or 5.8w combined. Now if I hook these pairs up on their own fan header will this sucker blow? I've heard the Abit rails are rated for 6w. If this is so then my fans are below this limit by an ok margin (5.8w on the 2x120mm & 5.2w on the 2x80mm's) and would work. At the same time I don't want to screw up my new $200 motherboard.
Last edited: