5500 3dmark2001 with Geforce2

[OC-Master]

yes it can be done, when your GPU is running at 293MHz!

[OC-Master]

rulle,

is 5500 3dmarks 3dmark2001 of goodness enough heh


..

[wolfsid]

Originally posted by AXIA
yes it can be done, when your GPU is running at 293MHz!


what kind of card U have exacly and what kind of cooling do U have on it...

hack the planet...:burn:

[]-[itman]

sweet good oc. Can you give me a link to madonion so i can directly compare my card with yours? Also, what were you getting at default speeds?

[wolfsid]

Originally posted by ]-[itman
sweet good oc. Can you give me a link to madonion so i can directly compare my card with yours? Also, what were you getting at default speeds?


yes I would also like the link so I can compare it cuz U know its soo easy to modified the numbers on a picture.. when they say a picture is worth a thousand word they weren't kidding:D

Hack the planet.:cool:

[AtomicGuY]

5500 is VERY impressive for a GeForce 2 with a 1.33 Athlon. Thats the highest one I've seen yet with that config!

then again, its a titanium and Im thinking, nVidia did a little tweaking with the core.

[OC-Master]

Here you go:

http://gamershq.madonion.com/compare2k1.shtml?2102208

Update:

now, I guess 5507 was my highest. NICE!!!

[jbslow]

Nice AXIA I can get those scores with my G2 ultra but I have to overclock my 1.2 Athlon , overclock my v/c 250/458@300/515 and I have to use the beta drivers.

Whats the default core/mem. on your card and what drivers are you using?

[OC-Master]

My drivers are Det XP 23.10 and the defualt clock rates are 250core/400mem.

The reason for all this speed is because the Titanium core is .15 micron which boosts it a little tiny bit extra. 300MHz is easy with the standard blue orb with the chip just getting warm.

[Dark Illusion]

Why is your screenshot all funny-lookin? I hope games don't run like your desktop=P

[OC-Master]

OK OK, I now bumped the FSB to turbo giving me a 143MHz (286FSB)

1360MHz with 275/477.

My highest score yet!

http://gamershq.madonion.com/compare2k1.shtml?2102757

5730 3Dmarks

I bet I can hit 6000


anyhow, about that screenshot, yea, I was too lazy to install a paint program that can shrink down the image. I just cut out the important stuff from one part of the screen shot and imported it into the other part. Its strage how MS Paint wont allow to shrink the whole picture in resize. forum only allows 600x600 max. :eek:

[Maximus Nickus]

Hey AXIA what happened to your GF3 Ti200??? That was running @ 233/533!!!! What went wrong.....

[OC-Master]

sold it bro! because I"M really hurtin for $ and I needed the $100 to soon purchase my new 80GB Maxtor 7200rpm ATA133 drive! with fluid motion technology, none of that old bearings junk thats noisey!

[Dissolved]

nice score :) i only get around 3700 on mine.. but i think im gonna up the speed and run 3dmark2k1 again, and see if i can get more :)

[Maximus Nickus]

I hear ya man!!!

Just got a 60gig one wif a 8kha+ still waiting for my 8500 so I can't use it but it looks well cool!!

If your low on $ get the 60gig, its about $100 cheaper than the 80!!!

Only prob is where can you get ata133 cards...?:D

[hyperbob]

how much texture quality do you have?

[Dissolved]

Originally posted by nick_cw
I hear ya man!!!

Just got a 60gig one wif a 8kha+ still waiting for my 8500 so I can't use it but it looks well cool!!

If your low on $ get the 60gig, its about $100 cheaper than the 80!!!

Only prob is where can you get ata133 cards...?:D

maxtor has the ata133 card on there site.

[supergenius74]

Its a titanium not a geforce 2, this is a difference. nuff said.

[Dissolved]

Originally posted by Dissolved
nice score :) i only get around 3700 on mine.. but i think im gonna up the speed and run 3dmark2k1 again, and see if i can get more :)

well i tweaked my gts to 3866, looks about the hightest i wanna go till i get ram sinks for it.

[Dissolved]

now i know why he got so many points..

he did 3dmark2k1 in 640x480 16bit color.

[Warlord2]

AXIA


try running it at default setting so we can see how good your card realy is:D

[Dissolved]

Originally posted by Warlord2
AXIA


try running it at default setting so we can see how good your card realy is:D

yuh.. that would be good.. i only get 3866, and i have a 1.533ghz cpu..

[Warlord2]

I get 4200 with a gf2 ultra and I dont think it could do better if any thin 5000

[Dissolved]

Originally posted by Warlord2
I get 4200 with a gf2 ultra and I dont think it could do better if any thin 5000

i have a visiontek also. what are ur defalut core/mem speed? and do u have ur vid card oc'd?

[Frankie]

What is is your score with default benchmark? Now you are using only 640x480 16bit resolution!?

[Warlord2]

i have a visiontek also. what are ur defalut core/mem speed? and do u have ur vid card oc'd?

its a ultra so I think its default clock is like 285/460?

my computer needs a new mobo so I cant look it up

and I think my card was overclocked to 300/500 at that time

it will go to 320/519 but after that it will get artifacts and lockup in 3d mark

[OC-Master]

opps..


man, I'm dumb today, @ defualt, it was last just over 4500. If I ever get back to 3dmark, I'll post some more results!

[Maximus Nickus]

SO what resolution u at??????????

LOL:cool:

[oc jason]

got that beat 1330 mhz , default benchmark

Leadtek Winfast GeForce 2 Pro default is 200/400, set at 250/465

1330mhz but BIOS set at turbo cas 2 mem settings,Windows XP

*not a titanium* regular GF2

[]-[itman]

Originally posted by oc jason
got that beat 1330 mhz , default benchmark

Leadtek Winfast GeForce 2 Pro default is 200/400, set at 250/465

1330mhz but BIOS set at turbo cas 2 mem settings,Windows XP

*not a titanium* regular GF2

good score. What do you get at default settings on the card and on 3dmark? Also how far oc'd is your fsb?

[Maximus Nickus]

He said 1330 so i'd guess 133FSB.

[undertaker_OZ]

I thought i would give the driver hack a tryout before i fire up the soldering iron

Lo and Behold (http://gamershq.madonion.com/products/orb/?publish_compare.shtml?&project_type=6&dprid=2123602)

Previously getting 4641 Before Quadro Driver Hack (http://gamershq.madonion.com/compare2k1.shtml?2093641)

BTW the infor on the quadro driver and solder hack was sourced from the abundance of infor that is the geforcefaq (http://www.geforcefaq.com)
So Out comes the soldering iron tomorow

its a plain vanilla geforce 2 pro HIS generic from taiwan cost me $320 Aussie dollars about $150 US Themal take blue orb and BLue Memory cooler kit with CT technologies non silicon white heatsink compound waiting for my arctic silver II adhesive to arrive from www.pccca.com.au (hint hint) No trickery involved at all except the hacked 22.80 drivers that i hacked using the Quadro utility available @ www.geforcefaq.com oh and the mem & ram speeds are 244/472 very mild indeed

I have a few customers that were interseted in buying quadros for a rendering bank but no longer any need and that money can bee thrown into more memory and processors/processor speed:mad:

Hard to beleive nvidia would deceive the highend market into thinking they needed quadros to get those rendering features and extra performance ta ta Nvidia
As its time to do the vcore mod to my 8KHA+ and see how far this XP1600 can really go

Regards

Chris

[oc jason]

well as i stated that is default settings on 3dmark, and that is default FBS settings, of 133. its a 1330 chip jsut sitting at 10x133 but yes the mem timings are set to turbo.

All i did was jsut test till i found the fastest driver at default and then tested useing that driver, to see what set of VIA's were the fastest. After that tried dx8 and dx8.1 to see what was faster

Ended up with VIA 4.35, det 4 2250, adn dx 8.1 and jsut upped card speed. to 250/465

[oc jason]

Originally posted by nick_cw
He said 1330 so i'd guess 133FSB.

thanks for understanding, yes it is at 133 seeing as that would be default LOL

and default speeds on teh card gave me like 4882 points

[Warlord2]

dfahjkfhadjhfaklfhadsljf

a gf2 pro at default smashed a gf2 ultra card overclocked to 300/500!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!
what gives?

oc jason can you post a madonion link so I can compare my results with yours?

[LordRHYMEZ-]

Where can i get that program where i can overclock my GeForce 2 PRO 64MB DDR Videocard?

[LordRHYMEZ-]

133 CPU Ratio with a 10.5x Multiplier, Do the math.

[funnyperson1]

www.nvmax.com

[undertaker_OZ]

System is now running 11@139@1537.93Mhz in cpuid but now 3Dmark 2001 jumps out i suspect its memory settings any suggestions on a perfect 8KHA+ bios setup for 512MB PC2100 DDR


Everythingelse is rock solid left sandra looping all night with folding @home screensaver running all night it was damn hot to touch this morning but still goin strong @ 1537


hopefully today the resitors will arrive for the voltage mod
Im about to supercool the GF2 with the addition of 2 x 80MM fans to cool it & those ram sinks down now i guess the only other thing i need is the Artic Silver Adhesive to arrive



Regards

Chris

[Maximus Nickus]

Up the memory voltage.

[oc jason]

yes ill try to get the madonion thing sorted out, but i am not registered with them , adn when i try to do anything it says im not logged in. I look into it more.

Maybe iut does beat a gf 2 ultra but is he at 1330 mhz and turbo settings, maybe hes not and that is why it was beatin

[hyperbob]

I got 5409 with gf2ultra and lower quality textures

[oc jason]

maybe its because i have the absoluts fastest video drivers, and VIA drivers, and DX8.1 for my system, that is the fastest combonation i cna acheive. Using 21.81 VIA 4,32 adn dx8 i got under 5000 at hta same settings.

try turnign vsync off, and in one of the driver tabs, you can change from best quality to best performcane, thatll get ou a fe more FPS....my stuff is really tweaked

[WarriorII]

I hate you. I want your vid card.:cool: send it to me now.plz.
I get 4035 @ 800x600@16bit. :eek:

Will have to try the 640 setting when I get home from work tonight.:burn:

[Maximus Nickus]

Originally posted by WarriorII
I hate you. I want your vid card.:cool: send it to me now.plz.
I get 4035 @ 800x600@16bit. :eek:

Will have to try the 640 setting when I get home from work tonight.:burn:


Why are you complaining? Over 2000 is enough for today's games, anyway think yourself lucky I used to get 980 wif my old 64MB MX, and a 1200CPU! I think it was because I had a s*** board though.

Jetway 663ASPro

[Dissolved]

Compare URL: http://gamershq.madonion.com/compare2k1.shtml?2151736

my new stats, not too much better, but im working on it..

[Robert]

Hello, THis is my:

[Dissolved]

Originally posted by Robert
Hello, THis is my:

post the compare link..

[Robert]

Ok. I got it. http://gamershq.madonion.com/compare2k1.shtml?2163296

[Dissolved]

Originally posted by Robert
Ok. I got it. http://gamershq.madonion.com/compare2k1.shtml?2163296

geez u beat me on a few things, im shocked.. lol
i think i need new chipset drivers or something.. my card doesnt seem to matup with other ppls gf3 ti500's :(

[Dissolved]

oops forgot..
http://gamershq.madonion.com/compare2k1.shtml?2162271

[TranceBear]

This is my best score with a MX400!!!!!
Jason and myself are in a different tweaking catorgory than most of you, we have been around for awhile.

*edit*
I was running at 1.55ghz and Win98SE at the time.

[Dissolved]

Originally posted by TranceBear
This is my best score with a MX400!!!!!
Jason and myself are in a different tweaking catorgory than most of you, we have been around for awhile.

*edit*
I was running at 1.55ghz and Win98SE at the time.

thats pretty good, i only got 3800 with my gf2 gts, but i didnt have ramsinks on it, just the blue orb..

[rUfUnKy]

http://gamershq.madonion.com/compare2k1.shtml?2135735 4391..better than my voodoo 5 (1960 @ 1571 mhz) :D

[rUfUnKy]

oops that last post was OC'ed heres the default http://gamershq.madonion.com/compare2k1.shtml?2135615 (4130 3DM)

[Warlord2]

ok finaly ran some 3dmark 2001 benchmarks with my new motherboard

here is what I got at 1470mhz and visiontek gf2 ultra at 305/510

http://gamershq.madonion.com/products/orb/?3d2k1_details.shtml?&prid=2162781

5537

this is with my fsb at 147 and on the fastest memory settings

nothing is tweaked just overclocked

[Robert]

Hello again, My new speed:mad: http://gamershq.madonion.com/compare2k1.shtml?2169191

[Arkaine23]

I hate to be a bastaad, but I got 5720 on a Leadtek GF2 Ti... this is where the artifacts just start to appear. My non-OC'd score was somewhere around 4300-4400.

DirectX 8.1
Detonator 23.11
XP 1600+ @1596MHz- 152 FSB x 10.5 (not entirely stable at this speed, need volt mod)
255/527 core/memory from 250/401 stock.
default test with V-sync off and best performance selected

Blorb, radioshack aluminum heatsinks for ram, Artic Silver 2 & superglue. 2x 80mm intake fans side mounted near expansion slots. I can't get my core any higher, but I think the spring clips on my blorb aren't very tight. Have been considering removing the blorb base and replacing it with a lapped U.S. silver half-dollar. Still in the planning phase though.

Also, modded this card for improved image quality by removing 9 capacitors that serve as low-pass filters to monitor cable.

Will be doing a softquadro mod shortly. Any1 have a driver version to recommend for this mod? How about voltage mods for the card?

I know you want the madonion link, so give me a minute to copy it and post again. I'm in like 3rd, 4th, or 5th place for XP processors within 50Mhz or so and using the GF2 GTS/Pro/Ti-class card.

[Arkaine23]

5720 right here: http://gamershq.madonion.com/compare2k1.shtml?2442564

[rogue1979]

Gainward Geforce Ti 2 500 @ 295/523

default 3DMark 2001 - 5675

1512MHz Thunderbird on Epox 8K7A 168MHz fsb
Windows 98, Detonator 23.12
Quadro 2 resistor modded, Nvidia Geforce 2 Ti reference bios
low pass filter capacitors removed

[Arkaine23]

Installed my silver orb and was able to raise the GPU core speed above 255 finally. I didn't even have to deface any US currency to make the slorb!

Now running the GF2 Ti @ 279/535... my XP 1600+ @ 1612... 153 FSB. Still got the 23.11's, but I d/l'd new and old dets, so I'll be testing them out this week and maybe softquadro modding a few of them.

Oh yeah, my new 3dmark score 1024x768x32bit: 5867

http://gamershq.madonion.com/compare2k1.shtml?2545320

This puts me in 3rd place for all Athlon XP's up to 1633 MHz with a similar card on the default test. My original score with no overclock on the computer or video card was like 4300-4400. So I've made like a 30% improvement in 3dmarks.:D

[LabMan]

yeah its easy to get over 5000 in 640x480... http://gamershq.madonion.com/compare2k1.shtml?2550373
for those that dont have a madonion account i got 5872

and this is with a 10mhz core overclock and a 6 mhz mem overclock, with icq, msn and folding running in the background...

my real score is in my sig just click on it

[Arkaine23]

Just did the softquadro conversion on my card and my 3dmark score went up? Must be because I'm using 22.40's now instead of 23.11's.

5916. Still 3rd up to 1633, 9th for all XP's up to 2100

http://gamershq.madonion.com/compare2k1.shtml?2552140

[Wowbagger]

Hi Dudes,

when I do a 3D 2001 bench, use 1024*768*16, 16 Bit Texturequality, Tripple Buffer.

I am running a non OCed GF2 GTS, AthlonXP1800+ on EPoX 8KHA+ (1.65V Vcore, I know its low, but more stable and even more scroe !! Dont ask me why, i am very surprised :)!!!
512 DDR Ram.

My Score is about 4200 to 4400 differes, if my computer has a good or bad day :) !!!

CyA