PDA

View Full Version : Help with new case please


Myself and I
11-30-01, 08:29 PM
Ok i just bought a case
http://www.coolerstar.com/noname32.htm

I need to know how to setup the fans

I have 2 92mm fans blowing on the mobo and 2 80mm in the back of the case with 1 up front.

to tell you the truth im not sure whether the fans are facing the right way i.e. is the fan sucking air into the case or blowing out.

In the link you will see the setup,
where you see the fans sticking where the rotor is does that mean the fan is blowing in? im not sure. Also i heard you want the back sucking air out and the front sucking air in.

And i want the 2 92mm blowing on the mobo.
Thanks
Also i combined this case with a 431 watt enermax psu just thought it might add to my overclocking experience.
Also i need a good link to a alpha pal 8045 with a good cfm rated fan
l

Wicked Klown
11-30-01, 08:45 PM
If your not sure if tey are sucking or blowing take the fans out and look most fans will have little arrows showing which way the fans turn and which way the air is blowing. Also you want the two on the side and the one up front sucking air in and the two at the top blowing the air out. Got to www.crazypc.com they have the H.S.F. you want with or with out a fan. They have the Alpha PAL8045T Bare Heatsink for $39.95 and you can add a Delta 80mm 68 C.F.M. fan for $15 more.

dreadlord79
11-30-01, 08:56 PM
Klownin79; do you read minds or something? I was thinking the exact same thing!:eek:

Sonny
11-30-01, 11:40 PM
Well the lower fan looks like it's an exhaust but you can always reverse it to blow in. I got an idea for you but you will need to do a little case mod.