What fittings fit a PA 120.2?

lokitexas · Dec 31, 2006

If I was going to use 1/2 ID tubing...what fitting size do I need to buy for the PA?

IT says "Fitting Thread: 3/8" BSPT/NPT", but I cant seem to decipher what the actually threaded part is. Its wider than the ones that go on my Apogee etc...and I went to my local hardware store with no result.

Any post a link to something I can use?

OCnewbee · Dec 31, 2006

I just ordered that same rad, you should be able to use these:
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=203&products_id=2304

nikhsub1 · Dec 31, 2006

OCnewbee said:
I just ordered that same rad, you should be able to use these:
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=203&products_id=2304

NOOOOO! They are 3/8 BSP or G3/8 which is a parallel thread, npt is a taper thread. These are what you want to use with all Thermochill rads: http://www.cooltechnica.com/Merchan...e=AQX-HIFLO-G38-12&Category_Code=Barb_Fitting

lokitexas · Dec 31, 2006

nikhsub1 said:
NOOOOO! They are 3/8 BSP or G3/8 which is a parallel thread, npt is a taper thread. These are what you want to use with all Thermochill rads: http://www.cooltechnica.com/Merchan...e=AQX-HIFLO-G38-12&Category_Code=Barb_Fitting

Thanks so much. I was banging my head looking for the right one. I knew the ones I had seen didnt fit the bottom part since I have the PA already here and matched my current fittings to it.

Thanks much nik!!!

OCnewbee · Dec 31, 2006

nikhsub1 said:
NOOOOO! They are 3/8 BSP or G3/8 which is a parallel thread, npt is a taper thread. These are what you want to use with all Thermochill rads: http://www.cooltechnica.com/Merchan...e=AQX-HIFLO-G38-12&Category_Code=Barb_Fitting

yeah your right, when i ordered my rad i asked for 1/2" fittings. I thought those would do for him. thanks for the correction.

lokitexas · Dec 31, 2006

OCnewbee said:
yeah your right, when i ordered my rad i asked for 1/2" fittings. I thought those would do for him. thanks for the correction.

I have 3 different barbs coming in now from 3 companies...lol. I am going to have quite a bit of spare parts I am guessing.

Lets see...

Tubing, 2 Res's, a Rad, a Pump, and now a ton of fittings...sheesh.

What fittings fit a PA 120.2?

lokitexas

Member

OCnewbee

Member

nikhsub1

Unoriginal Macho Moderator

lokitexas

Member

OCnewbee

Member

lokitexas

Member

Similar threads