- Joined
- Mar 30, 2004
- Location
- Northwest Indiana
Specs:
Bios = 1707
e6600
2x1024 crucial ballistix tracer 6400 4-4-4-12
P5W DH
coolermaster real power 550 trip 12v rail
H20 cooling and plenty of case fans
7950GX2
2x raptors RAID0
Ok Im sitting at 3.5ghz right now with temps at idle at 18c for the CPU and 25c for the mobo. Heres is my nios settings
AI OC = manual
CPU Feq = 388
DRAM Freq = 776
Perf mode = auto
PCIx Freq = 100
PCI clock 33
Mem volt = 2.2 (4-4-4-12)
CPU volt = 1.4875 (CPU Z SHOWS 1.213 volts though and ASUS Probe shows 1.48 and on a few occasions PC Probe said my CPU temp was 225c !!!! bios says otherwise....Liquid cooled with a corsair nautilus with another inline black ice extreme 120mm rad and 120mm fan)
FSB Termination voltage = 1.3
MCH = 1.55
ICH = 1.05
Multiplier is set to 9x with all that stuff in the multiplier page disabled except that one u have to have enabled...forgot the name
I can go into windows and stuff and all is well....fire up 3dmark and abit into it it reboots PC....temps dont increase that much either. I just want u to look at my bios setting/setup and give me some pointer and advice or settings I could try. Thanks!
Tested temp issue with PC prob and bios....no probs...must be a program error
Bios = 1707
e6600
2x1024 crucial ballistix tracer 6400 4-4-4-12
P5W DH
coolermaster real power 550 trip 12v rail
H20 cooling and plenty of case fans
7950GX2
2x raptors RAID0
Ok Im sitting at 3.5ghz right now with temps at idle at 18c for the CPU and 25c for the mobo. Heres is my nios settings
AI OC = manual
CPU Feq = 388
DRAM Freq = 776
Perf mode = auto
PCIx Freq = 100
PCI clock 33
Mem volt = 2.2 (4-4-4-12)
CPU volt = 1.4875 (CPU Z SHOWS 1.213 volts though and ASUS Probe shows 1.48 and on a few occasions PC Probe said my CPU temp was 225c !!!! bios says otherwise....Liquid cooled with a corsair nautilus with another inline black ice extreme 120mm rad and 120mm fan)
FSB Termination voltage = 1.3
MCH = 1.55
ICH = 1.05
Multiplier is set to 9x with all that stuff in the multiplier page disabled except that one u have to have enabled...forgot the name
I can go into windows and stuff and all is well....fire up 3dmark and abit into it it reboots PC....temps dont increase that much either. I just want u to look at my bios setting/setup and give me some pointer and advice or settings I could try. Thanks!
Tested temp issue with PC prob and bios....no probs...must be a program error
Last edited: