Conroe Overclocking Database

[baylord]

I can't find a Conroe database of overclocking results on ocforums, so I'm starting my own.

Rules

Rule #1: Follow the template
Rule #2: Supply CPU-Z validation link
Rule #3: Supply screenshot of at least a 4 hour Prime95, Orthos (small FFTs please) or SP2004 run (all cores)


Template
Conroe Type: E6700
Clock Speed: 3,633
Step: 6 B2
Week: L623
Code: A549
vCore: 1.5
Cooling Method: Air/Water/Phase
Cooling Brand: Typhoon/VapoChill/Scythe Ninja, etc.
Motherboard: Asus P5W DH Dlx
BIOS version: 1101
RAM Brand: OCZ
RAM Speed: 6400
RAM Mhz: 723
RAM Latency: 5-5-5-15

As everyone submits their results, I'll compile the results into an excel sheet and post a screenshot of the results on this first page.

[Roisen]

I'm not done working on the clock or timings yet, but here you go.

Conroe Type: E6400
Clock Speed: 3,000
Step: 6 B2
Week:
Code:
vCore: 1.20
Cooling Method: stock air
Cooling Brand: Intel
Motherboard: EVGA 680i sli
BIOS version: 6.00 PG
RAM Brand: Corsair
RAM Speed: 6400
RAM Mhz: 1000
RAM Latency: 5-4-4-12

I've made a little progress in the ram speed, as noted above

[hUMANbEATbOX]

i don't have something to contribute right now (i will), but you should list the ram speed in ACTUAL mhz, not the DDR2 rated speed. so 723/2=361.5mhz. and Roisen would be 900/2=450mhz.

[Evilsizer]

rule number 3 should also include SP-32m as it is a good stresser as well. you will need to run one for each core.... as well overclockers has a cpudata base but hasnt been updated since 4-28-05
http://www.cpudatabase.com/

another thought... the "conroe" database should be "Core 2" database to include the new E4300 which is allendale core... soon the E6300/6400 will be allendale core as they were meant to be from launch. i get a sense there is still alot of conroe cored E63/64's in the market atm.

if the user supplies a SS of the oc as part of the rule. then why do you need the template with the same stuff you can read in the SS. imo its going to add clutter to the thread. just run 3 instances of cpu-z with ram tab open/cpu open/motherboard tab...

just helpfull comments to make it a better Core 2 database since the other is no longer maintained.

i have to watch my pc closely cause i can get to 6hr orthos stable but i want 8+hrs @3.2ghz but that doesnt seem to be happening.... gimmie some time and i will have others then this one on my E4300 / Abit Ab9-Pro (bios 1.6) / Corsair 6400-C4's V2.1
http://img.photobucket.com/albums/v733/Evilsizer/ocforums/e43003s.jpg
also gonna have to pop my e6300 back in...

[kayson]

If someone has hosting, I'd be happy to put it all in a mysql database and make some simple php search. I've been looking for a php project to do.

[GuitsBoy]

I think the e4300 is an allendale, but maybe it fits here too...

Allendale Type: E4300
Clock Speed: 3000 (333 x 9)
Step:
Week: Q643
Code: A026
vCore: 1.3875
Cooling Method: Air
Cooling Brand: Stock HSF
Motherboard: Gigabyte GA-965P-S3
BIOS version: F8
RAM Brand: OCZ
RAM Speed: 6400
RAM Mhz: 833 (333 x 2.5)
RAM Latency: 4-4-4-15

Havn't seen it get out of the high thirties under load.

Got it to boot and operate at 3.2 GHz, but had some stability issues and didnt want to go past 1.4000 V core.

[Vipasnipa]

I have a dedicated box down in a datacenter in California that is right about 99% idle. I'd be happy to supply a mySQL database and webspace. Contact me for possible discussion.

[einstein2]

Allendale Type: E6300
Clock Speed: 2.96 (423 x 7)
Step: 6 B2
Week: Q643
Code: A026
vCore: 1.3875
Cooling Method: Air
Cooling Brand: Scythe Ninja
Motherboard: Gigabyte GA-965P-DS3
BIOS version: F7
RAM Brand: Kingston
RAM Speed: 4200
RAM Mhz: 720 (288 x 2.5)
RAM Latency: 5-5-5-18