core2duo inputs please

[jamescardenas07]

specs
e6600 @ 3.4ghz; 1.41v
apogee waterblock
MCP655 pump
120.2 rads w/ 114cfm panaflos
swiftech microres resevoir
7/16 tubing

idle: 50C
load: 57C

i live in hawaii.. my room temps currently is 24C
is this a good temp? ive reseated and applied as5 many ways and this is the lowest ive seen my temps

[T-Virus]

specs
e6600 @ 3.4ghz; 1.41v
apogee waterblock
MCP655 pump
120.2 rads w/ 114cfm panaflos
swiftech microres resevoir
7/16 tubing

idle: 50C
load: 57C

i live in hawaii.. my room temps currently is 24C
is this a good temp? ive reseated and applied as5 many ways and this is the lowest ive seen my temps

I would say it should be allot less around 48 load and 30 idle.

[jamescardenas07]

wtf!!

[Rattle]

i get better temps with my tuniq tower in florida

[jamescardenas07]

damn why is my temps high

[Rattle]

dunno I dont have any water cooling experience

[reclaimer122]

You're voltage is pretty high. I have mine at 3.4ghz with just 1.32v. Maybe just a difference in chips though.

[jamescardenas07]

hmm i dont have a/c btw

[reclaimer122]

What is your case temp? Mine is 29C most of the time.

NVM :) just saw you have water...

Oh, are your waterblock and CPU lapped? I have both mine lapped and I'm at 28C idle and 45C load. Before I lapped I would usually have like 31C idle and 52C load.

[core2due]

Is there good flow in the water cooling loop?

[batboy]

That's not that bad for such high ambient temps. Those Core 2 Duos do fine up to the low 60's. I know those 680i mobos tend to run hot (N/B anyway) and those 8800 get pretty warm. Maybe you should improve case ventilation a little.

[Tommithy]

Looks like you are cooling just your CPU right?

How is your rad mounted? Inside the case or outside? Where is the air you are pushing through your rad coming from? Is it case air or air from outside the case?