Hey everyone I am stumped with an issue I have been having with my new processor. It is a P4 2.8b Northwood and I have it installed to my Abit TH7ii mobo with the latest EH bios update. I set the setting in the bios to user defined at 133 / x21 and the Speed Error Hold setting to off. It boots up ok and runs for a while, then restarts with no blue screen. I am thinking maybe it is overheating (45C idle / 61 loaded) or the CPU is being under or over voltaged. I believe the Chip recommends a 1.525v setting which i tried... also tried a 1.55v and a 1.6v setting with no avail. I am running 4x 256mb PC800-45 (400 Mhz) RDRAM if that helps. Any advice for bios settings or solutions would be much appreciated!
Seth
.
Seth
.