Fatal Error.......SYSTEM HALTED

Ok, I continue to get this message over and over.

CHASSIS INTRUDED !!!!
Fatal Error.......SYSTEM HALTED

After it detects everything....

I reset the BIOS, and sometimes it works...


It all started when I changed out Corsair 4x 512 for 2x1024's....

Mobo in question is the P5WDG2-WS Pro.

Check your mobo manual and see what it says about chassis intrusion detection. It may be possible when changing out the RAM you dislodged a jumper.

Actually, I think they are 2 different errors. The Chassis Intrusion is a switch that is probably mounted in your case and attached to the mobo. When you replaced the ram, you opened the case. Therefore, the notification. The Fatal Error probably has to do with unstable ram. Rum Memtest and check it for errors.

Interesting enough I'm not using the intrusion detection option. Just a jumper on the mobo which is bypassing its use.

I think its an incompatibility when I enabled both onboard RAID controllers.

When I added the 3ware, the problem disappeared.

Its back again.... I can't figure out why, just yet...