KT7A booting with CDROM, Raid 0 drive not recognized?

[livan]

I use Norton Ghost to mirror my hard drives. So waht I used to do is use a floppy with Ms dos to boot into dos and start Ghost etc. But with a recent upgrade I no longer have a floopy so I made a floppy image and I am now booting off the CDROM,. Everything seems to be ok except one HUGE PROBLEM. When booting from the CD, it does not see my RAID 0 array drives. Just to make sure, I put the floppy back, sure enough, the raid is recognized again.

I am using a KT7A Raid board. Anyone have anyway to make booting off teh CD Recognize the Raid?

[_Will_]

My guess would be it has something to do with cdrom only being able to read versus floppy's read/write.

Its possible that the program is trying to store temporary data while running the program on the disk but is unable to do so because it *thinks* its a floppy still.

[livan]

What does it have to do with writing? I am not sure what you mean.

The Raid ) array is recognized when I boot fromt he Floppy. (Without loading ANY RAID DRIVERS) The Same image when put on a CD, while it boots fine. It doesn't recognize the Raid Disks....

That is my problem...

[Shadow ÒÓ]

download the floppy from the mfg's web site?