Im a bit mystified.
When I built my Neo4 rig, with a 3000 AMD chip, I had a lot of trouble getting the memory , dual chan twinx cmx512-3200c2, to run at even a bit over 200mhz.
So Ive been running it at 166 divider at around 200mhz.
Now in fooling around with adding a dual core (another horror story) I accidentally ran the memory at 1:1 or 240 Mhz.
This at only 2.65 volts (stock voltage?)
Cas 2.5 3 3 8 (not 100% sure about the last 3 but it was 2.5)
Cpu OC to 240 fsb X 9 multi (am going to bump this up )
Now the only thing I did was upgade the boards bios to ver 1.d, but isn't that a fairly high memory overclock for this??? No way it would work last time I tried it. Im back using the 3000 single core.
I did some prime95 testing and no errors. Modules also seem cool to the touch.
So whats the story , am I dreaming or is this normal performance?
When I built my Neo4 rig, with a 3000 AMD chip, I had a lot of trouble getting the memory , dual chan twinx cmx512-3200c2, to run at even a bit over 200mhz.
So Ive been running it at 166 divider at around 200mhz.
Now in fooling around with adding a dual core (another horror story) I accidentally ran the memory at 1:1 or 240 Mhz.
This at only 2.65 volts (stock voltage?)
Cas 2.5 3 3 8 (not 100% sure about the last 3 but it was 2.5)
Cpu OC to 240 fsb X 9 multi (am going to bump this up )
Now the only thing I did was upgade the boards bios to ver 1.d, but isn't that a fairly high memory overclock for this??? No way it would work last time I tried it. Im back using the 3000 single core.
I did some prime95 testing and no errors. Modules also seem cool to the touch.
So whats the story , am I dreaming or is this normal performance?
Last edited: