PDA

View Full Version : another memory voltage Question (sorry)

Subzer0
12-09-01, 09:48 AM
well is this only an option for DDR ram?
i couldnt find it in my bios......IWILL kk266? sdram mobo
Subzer0
12-11-01, 07:32 AM
is it really that hard to answer ? anyone? please?
its just im having instability with mot so big overclocking
e.g. +11x mult and 144+fsb but im not sure whats to blame!
wolfsid
12-11-01, 09:48 AM
Originally posted by Subzer0
is it really that hard to answer ? anyone? please?
its just im having instability with mot so big overclocking
e.g. +11x mult and 144+fsb but im not sure whats to blame!


more info on the problem and question and maybe you will get a better answer...
Placid
12-11-01, 10:37 AM
Both ddr and sdram can have memory voltage adjustment.
No idea if your board has it, sometimes it's called vio.
If its vio be aware that it also raises the voltage to your cards that use 3.3v as well as the memory.
Subzer0
12-12-01, 11:02 AM
ok the reason why i want to ask this question is i dont seem to be able to overclock very high, its not a heat issue but at the same time i cant figure out if its the fsb or multiplyer that stops me from going much more than 1584mhz from 1.4 ayhja.
i have looked everywhere in my bios ,i will try to find "vio" but i dont recall it. thanks for the idea though!
i dont think a voltage mod will do it yet either as its not like im going crazy with the OC.
any ideas,if i go more than 11.5 it wont boot,the same with more than 145 mhz?
thanks for the reply placid
wolfsid
12-12-01, 02:24 PM
Originally posted by Subzer0
ok the reason why i want to ask this question is i dont seem to be able to overclock very high, its not a heat issue but at the same time i cant figure out if its the fsb or multiplyer that stops me from going much more than 1584mhz from 1.4 ayhja.
i have looked everywhere in my bios ,i will try to find "vio" but i dont recall it. thanks for the idea though!
i dont think a voltage mod will do it yet either as its not like im going crazy with the OC.
any ideas,if i go more than 11.5 it wont boot,the same with more than 145 mhz?
thanks for the reply placid


try going 12 or even 12.5 mine didn't want to work on 11.5 but it work on anything higher then 11.5 work on 11 and 10.5 plus 10


i would try to higher the vcore to 1.75 higher and raise the multipler to 12 +...