Corsair TWIN2X2048-8500C5 2GB Kit DDR2-1066 XMS2-8500 Memory

hi all I just get my new rig up and running since yesterday

asus p5b deluxe
e6600
Corsair Twin xms2-8500 2gb
thermaltake 700w psu
150 gb raptor 10,000 rpm
http://img03.picoodle.com/img/img03/8/4/28/f_cpuzm_a4eb056.png
http://img01.picoodle.com/img/img01/8/4/28/f_cpuz2m_c1081cc.png
the setup is running pretty sweet so far but i would like to know how high can the voltage be set to on this pair because i have it set at 2.30v so far but i dont know if that is save or too high ? thanks for reply

If you are just going to run 400mhz you probably don't need 2.3v.

2.3v won't kill them, but I'd make sure you have a fan on them. If those are D9 chips (I don't feel like doing the research) then you're safe to go a little higher, but it's sort of overkill. What speeds are you trying to reach? I run mine at 500mhz 4-4-4 and it only takes 2.25v.

-Collin-

i was hoping to get to 3.3ghz but I dont think thats gonna happen i mean i could mess around some more