Hello everybody
I have a question according my mobo ga-6bxc(revision 1.9) by gigabyte
I have heard that my mobo cannot support the geforce card(only version 2.0 and above can support the gf card ,those who have the voodoo jumpers as said in the faq at giga;s site)
It’s a matter of voltage they say
Simply my mobo cannot deliver the amount of voltage required –I think the gf needs3.3 volts-
But I have read in an article that the gf2 cards use less power and that they might work with motherboards like mine
Also I have seen a lot of posts using the ga-6bxc (with a low process or lower than my first used pentium2 350mhz ) who are using a gf2 mx .
So here is the question: does anyboby use the ga-6bxc with a gf2mx card?
What is your revison version?
If I cannot run a gf card is there anything else that uses less voltage and can work and improve my fps?
I don’t wont to change the mobo –I think great of the chipset 440 bx- cause now I have a celeron at 850 (fsb 100) soon to be at 950 and will see next.
256ram ,and a riva tnt based viper550 card agp
and by the way the adaptor from slot1 to socket 370 I used was the qdi socket 370 which is great.
Worked fine and has voltage regulator and everthing
3dmark 2000 1024*768 at 16 score : 2072
I have a question according my mobo ga-6bxc(revision 1.9) by gigabyte
I have heard that my mobo cannot support the geforce card(only version 2.0 and above can support the gf card ,those who have the voodoo jumpers as said in the faq at giga;s site)
It’s a matter of voltage they say
Simply my mobo cannot deliver the amount of voltage required –I think the gf needs3.3 volts-
But I have read in an article that the gf2 cards use less power and that they might work with motherboards like mine
Also I have seen a lot of posts using the ga-6bxc (with a low process or lower than my first used pentium2 350mhz ) who are using a gf2 mx .
So here is the question: does anyboby use the ga-6bxc with a gf2mx card?
What is your revison version?
If I cannot run a gf card is there anything else that uses less voltage and can work and improve my fps?
I don’t wont to change the mobo –I think great of the chipset 440 bx- cause now I have a celeron at 850 (fsb 100) soon to be at 950 and will see next.
256ram ,and a riva tnt based viper550 card agp
and by the way the adaptor from slot1 to socket 370 I used was the qdi socket 370 which is great.
Worked fine and has voltage regulator and everthing
3dmark 2000 1024*768 at 16 score : 2072