- Joined
- Jul 21, 2002
- Location
- Branford, CT USA
Digg out your old PC2-4200 ~ 5400 you may be in for a surprise depending on the IC's.
I took this old kit of tracer out of retirement which I reviewed bout two years ago. I realized there must have been a bottle neck and while this is only 50MHz beyond the speed I reached in that review which was 800MHz. Here's the link if anyone is interested there's some info about CPU-Z when it would only read memory speed at 1/2 on the C19 chipset due to a formula mis-match;
http://www.madshrimps.be/?action=getarticle&number=1&artpage=1483&articID=372
Once i find out what's under the heatspreaders I may have some voltage options, at prsent these are running at 1.91V (recommended) during the review I felt the need to push the current to 2.1V very scary OR they may have a greater ceiling which is why I posted this..
I took this old kit of tracer out of retirement which I reviewed bout two years ago. I realized there must have been a bottle neck and while this is only 50MHz beyond the speed I reached in that review which was 800MHz. Here's the link if anyone is interested there's some info about CPU-Z when it would only read memory speed at 1/2 on the C19 chipset due to a formula mis-match;
http://www.madshrimps.be/?action=getarticle&number=1&artpage=1483&articID=372
Once i find out what's under the heatspreaders I may have some voltage options, at prsent these are running at 1.91V (recommended) during the review I felt the need to push the current to 2.1V very scary OR they may have a greater ceiling which is why I posted this..
Attachments
Last edited:
