WC with TT mozart tx

[megadeath900]

If one was to WC with the TT mozart tx. Wouldn't thier loop have to be rather large if since thepump would be at the very bottom and the res, block and rad would be at the very top? Would this extra length in the loop cause any difference in temps?

[-Blue-]

i'm defently interested in this, since i plan on buying the case in the next week, and would like to hear suggestions on how to set it up.

[OCnewbee]

If one was to WC with the TT mozart tx. Wouldn't thier loop have to be rather large if since thepump would be at the very bottom and the res, block and rad would be at the very top? Would this extra length in the loop cause any difference in temps?


Just cause the case is Huge, does not mean that the loop has to match the case. You can have a simple loop of cpu-rad-res-pump, or even throw in the gpu. Now that case would be great for a dual loop setup, cpu on one and the gpu(s) on the other. Mounting the pumps on the bottom and everything else on top would require longer tubing. Try to keep the pump and res at the same level or the res slightly higher then the pup. You can actually mount everything on the lower level of the case and keep the tube length and a minimum. So to answer your question, No. It all depends on the components used single or dual loop, one or two pumps and so on.

[-Blue-]

hey megadeath have you decided on which rads you will be using?

i bought the case today and the rads are going to be tight in there

i've been looking at these so far and not sure which ones would fit.

ser que haga alguna burrada y lo ponga en un lateral sujeto a la ventana y creo que seria demasiado peso aparte de que no me gusta como quedaria.

a si que me gustaria saber que me recomendais.

estos son los que eh estado mirando

Alphacool NexXxoS Xtreme II
315 x 135 x 46 mm
XT 240 (http://www.aqua-pcs.co.uk/index.asp?function=DISPLAYPRODUCT&productid=757)
276 x 120 x 45 mm
Flow 240 Radiator (http://www.aqua-pcs.co.uk/index.asp?function=DISPLAYPRODUCT&productid=668)
277 x 121 x 35 mm
Pro 240 (http://www.aqua-pcs.co.uk/index.asp?function=DISPLAYPRODUCT&productid=758)

i know the nexxxos is good but i doubt it will fot 2 in there, and i have no clue about the others so if any of you can comment on performance and if they fit well.

[legionaire45]

I have an Armor, which is pretty big. Here is my loop:
http://img2.putfile.com/thumb/5/13303403644.jpg (http://www.putfile.com/pic.php?img=5450672)
http://img2.putfile.com/thumb/5/13303403614.jpg (http://www.putfile.com/pic.php?img=5450671)
Radiator is in the 5 1/2" bays. It is a 120 x 2 rad held in with zip ties =P. My loop is kind of large but i'm getting plenty of flow from my Laing D4.