View Full Version : how good is US Robotics?
Drinkyoghurt
06-06-07, 02:13 PM
hey guys,
well i've had my trust router for 2 weeks now, at first it was ok, now at 3 feet distance it is giving only 70% signal and just disconnecting every 2 minutes.
now i have noticed this little router here: http://www.usr-emea.com/products/p-wireless-product.asp?prod=net-5461a&loc=unkg
i've read some good reviews about it but does anyone else have some experience with this router?
Their products have worked perfectly for me.
Never had one of their routers, but my Gbit switch is USR and it's been terrific for what I paid ($25 for an 8-port over 6 months ago).
Madwand
06-08-07, 02:04 PM
The hardware seems somewhat similar to the common Broadcom-based routers, though somewhat limited in RAM. Unless you really want the built-in print server (which I wouldn't entirely trust in any case), IMO you might be better off getting one of the more widely-used and supported routers.
E.g. Buffalo WHR-HP-G54 while it lasts, WHR-HP-G125 when it comes out and is stabilized.
(HP only for distance issues. If you're really 3 feet apart, then the problem's probably not the router per se, but perhaps interference or positioning -- e.g. a PCI adapter with antennae hidden in a corner having to pass through a computer to get to the router?)
http://wiki.openwrt.org/USR5461
http://www.dd-wrt.com/wiki/index.php/Supported_Devices
Drinkyoghurt
06-10-07, 03:28 AM
its a usb stick the signal goes to and it is directly facing it..i am getting very low signal from only 5 metres away(10-30 now )
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.