Bubba
12-13-01, 07:16 PM
Well I finally moved into my new home and had the time to setup my water-cooled rig.I bought a 1gig/200 T-bird from NewEgg for $66 to use in caseI had any misfortunes.I used my old A7M that I had pretty much thought I destroyed trying the Multiplier mod(I burned off a couple of the pads trying to solder those microscopic resistors) but I spent alot of time yesterday getting it to run with the ones that were still good.I am able to get 7,7.5,11,11.5 and that is it.I got it figured that 2 and 3 are on and cannot be changed and 1 and 4 are now reversed and on is off and off is on.Anyway I wasn't expecting much as I only was able to hit about mid 1300 with it on my 8KHA+.I am now at 163 FSB with a 7.5 multiplier and it is rock solid stable.And to top it off I am running my Micron 2100 at cas2 at 163.I'm sure it will go higher as my vio is set at 3.45 and vio1 is 2.8 but my vcore is 1.89.Is there a mod for the voltage and also what is the limit on fsb for this board?I bought it when it was gonna be top-dog and never even used it because I had to tinker with it first I've been so mad ever since and was determined to get it working again even if it only ran with a mult. of 6.5.I am still using the original bios.Oh by the way my temps aren't really as great as I thought they would be with water.They are around 35 but as low as 26 when I first load and then gradually work there way up and stay at 35