PSU for Q6600

[bbq]

Will OCZ 520w sli enough juicy to feed the Q6600 ?
I don't use monster GPU.

specs
E6600@3.6ghz@1.3625 will replace by the Q6600
AW9D_MAx
7100GS
3 HD total 1.5tera
2x1 OCZ PC8500
couple of case fans

Any chance i can get G0 stepping people ?

Thank you

[JamesXP]

Yes it will :D

[meionm]

it should be

[ShadowPho]

Lets see
P=IV
V=I/R
1.3625V on the E6600 from the normal 65W (?). So, normally you would have a 1.2V with 54A and 45 ohms. Resistance stays the same (I think....) so with 1.36 volts you had 62A drawn for a total of 84 watts. Now, Q6600 is a 95W thing, so you should be fine as long as you don't push it too hard :)

[noxqzs]

I use a PC&C 510 to power a q6600 and 8800gtx. haven't had any problems.

[bbq]

Thanks all .. i'm thinking to push the Q to 3.2ghz or more if it can go that high. Hopefully G0 can pass 3.2ghz+