MCT V2000 High perf. "Snap-on" kit II (For quad core)

[Ssilencer]

Ok, let's go round 2, this time the unit will be cooling a quad core Kentsfield.

Compressor: Tecumseh AE2413AS , 1/3+hp 14cc
Condenser: Custom made one, high capacity.
Evap: @itor evap kit, as always, but a strange prototype.
Gas: Mix butane/propane/r402


http://img120.imageshack.us/img120/3902/dscf1441mediumus7.jpg

http://img120.imageshack.us/img120/6324/dscf1439mediumil8.jpg

http://img167.imageshack.us/img167/1411/dscf1437mediumdh1.jpg

http://img148.imageshack.us/img148/6858/dscf1436mediumaf9.jpg

And this is one of the new condensers I got for classic units:

http://img297.imageshack.us/img297/7749/dscf1443mediumqu3.jpg

The v2000 will need to get side intake and out take holes for the condenser, so, I got some custom made grills for the sides:

http://img505.imageshack.us/img505/4331/dscf1419smallax4.jpg

These are 50cm x 15cm tall grills...

[Ssilencer]

Classic frosty shot :)
http://img178.imageshack.us/img178/3104/mad002mediumgs8.jpg

It's completely overcharged and uninsulated, temps about -43 unloaded, but unloaded means nothing, anyway, it is meant to hold a quad, so not much of a extreme temps
The fans are 120mm but they go inside the shroud this was just for kicks.

http://img172.imageshack.us/img172/1675/mad001mediumvs1.jpg


OK, now SHOWTIME



IDLE:

http://img456.imageshack.us/img456/2642/idle38customjl0.jpg


LOAD:

http://img461.imageshack.us/img461/3570/load27customzf7.jpg

Oh BTW, @itor Xtreme prototype EVAP

If you can't see the thermometer readings:

IDLE EVAP -42
IDLE QUAD -38
DELTA T 4C

LOAD EVAP -40
LOAD QUAD -27
DELTA T 13C

Some testing over a dual core 6420

http://img375.imageshack.us/img375/9364/dscf1566customhr4.jpg


http://img458.imageshack.us/img458/5548/spi2m2customna3.jpg



And some more on another quad core

http://img451.imageshack.us/img451/5476/dscf1557custommi5.jpg


http://img451.imageshack.us/img451/7459/dscf1560custombp7.jpg

:up:

[lloydy]

ooo i like, now help me with mine!! :) hehe. wish i knew how to make that, im playing around with a vapo chill unit at the moment

[Ssilencer]

http://img262.imageshack.us/img262/1763/enclosurelargeln3.jpg

Final case looks:
http://img406.imageshack.us/img406/2445/dscf1904smallye4.jpg