the Moen mod

[IAmMoen]

So as you can probably guess from my sn my last name is Moen. Like the faucet. So how can I integrate a faucet into a mod and how can I make it usable? Maybe to have some :beer: on tap....

So what ideas can you guys come up with?

[thideras]

So as you can probably guess from my sn my last name is Moen. Like the faucet. So how can I integrate a faucet into a mod and how can I make it usable? Maybe to have some :beer: on tap....

So what ideas can you guys come up with?That is an awesome idea.

You could use it as a handle.

Or you could put led's in place of the filter and use it as an accent or spot light.

[aja]

make it your power switch, depending on which one you use.

Even better: a fan controller, turn to adjust the speed..

But yeah, beer on tap takes the cake. Make sure you use a good draught...

[djrussell]

incorporate it into a WC rig. it could be the return to your reservoir.

[gangaskan]

incorporate it into a WC rig. it could be the return to your reservoir.



i was thinking that :)

include everything (kitchen sink too!)

[Murdochs_mad]

Have it on the front at the top and use and old cd drive below, push the eject button on cd drive put on a glass, pour drink. Jobs a goodan:beer:

[Twigglish]

I was thinking of running water through the faucet also. Have a tube coming out of it.

[IAmMoen]

That would be pretty wicked to have wc with the faucet as part of the loop. Would there be a way to make it so it would go through another route if I wanted it to. Time to do some experimenting!

[Scott9027]

i like the faucet just running into the res idea

but thats only if you dont want to set up the tap because that would blow it out of the water

[juane414]

Moen, whatever you decide to do... I hope I get to help :)

[EmAn]

heh sounds like you got something to tinker with on your hands now!

[dudleycpa]

Make the faucet part of a giant bong (to cool your computer of course).

[Godfather1138]

/\ That's kinda what I was thinking.

I would say definately use it somewhere in the loop. If not for contamination I would say make a small sink on the top of the case. Maybe do a cube to allow more room for this. The bowl of the sink would be your resi/fill point, and the faucet would be a free return point. You would have to consider splash due to flow also, but I think it is doable. You would probably want to add an easily cleaned filter somewhere after the sink as it would probably collect alot of dust over time.

[IAmMoen]

i just worry about noise. Maybe I could market it as "white noise" to help a person fall asleep :)

[g14novak]

Hmm, thinking about it, You could drill out the end and bottom of a faucet, run barbs through it, and make it just like a little piece of your loop. As for changing it if you don't want to use it, just put a 2-way valve in. When you don't want to use it, switch the valve to off, it bypasses the faucet, when you do want to use it, switch it to on. No mess situation ;)

[icantfindone]

+1 for evaporative bong cooler. The noise isnt that bad if you set it up right. . . from what I have read, you can put ping pong balls in the reservoir to cut out the dripping water noise, as well as steel wool, or some other sort of screen in the downtube to catch and slow the falling water. Also, you only need a single 12cm fan running to cool the entire setup, compared to 3-6 12cm fans on a 120.3 sized radiator.