PCP&C 510 SLI & a Q6600 setup

[iceage]

Do you think a PCP&C 510 SLI would adequately power the below rig?

P5K-Deluxe
Q6600 G0 @ ~3500MHz (1.375 vcore)
X1900xt 512mb (will probably flash to xtx)
2x 1Gb DDR2-800 sticks (PQI for now - probably get better sticks later)
4x 120mm San Ace fans
2x 80mm fans
3x 40mm fans
1 DVD-RW
1 CD-RW
1x WD 400Gb IDE 7200rpm
1x WD 400Gb SATA 7200rpm

I used the Outervision PSU calculator and came up with this, assuming 100% CPU Utilitzation/TDP and 100% Peak load:

0% Cap Aging : 496w
10% Cap Aging: 545w
20% Cap Aging: 595w


http://www.extreme.outervision.com/PSUEngine

[Oklahoma Wolf]

The calculator is wrong - you're under 350W. The PC P&C will be fine.

[iceage]

The calculator is wrong - you're under 350W. The PC P&C will be fine.

Thats great news. :D

How'd you come up with the 350w figure? I figured at least 100w for the CPU and another 150-200w for the vid card.

[Oklahoma Wolf]

Neither one needs that much power ;)

[iceage]

Neither one needs that much power ;)

Groovy groovy. :bday: