Well, I just read some more threads about people OC'ing with the same CPU I have (X2 4200+ Toledo) and then I changed some settings and here is what I ended up with:
I'm pretty happy and excited!
What is a good program I can use to check my CPU, GPU, etc. temps?
One suggestion, switch from 11 to 10 multiplier and get you ram up to about 260MHz, it ought to be able to do those clocks. Though you likely have to switch RAS to CAS delay to 4, RAS Precharge to 4 and Tras to 8.
Coretemp will give you die temps for your cpu.
Speedfan is good to monitor other temps and fan speed.
I recommend Rivatuner if you have an Nvidia card for OCing and temp monitoring
One suggestion, switch from 11 to 10 multiplier and get you ram up to about 260MHz, it ought to be able to do those clocks. Though you likely have to switch RAS to CAS delay to 4, RAS Precharge to 4 and Tras to 8.
Did you lower the hyper transport freq down to 4X? Ideally you want the hyper transport bus at or below 1000MHz. It is derived from the FSB X HT Multiplier. So from 200-250FSB use 4X and from 250 up to 333 use 3X.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.