t line

woppy1 · Sep 26, 2007

what do you plug the top of a t line with im thinking of putting one in for easy drainage but am wondring what to plug it with the reason im putting one in is because im a bit of a messy git when draining and tent to spill it everywhere so what im thinking is when i want to drain pull the t line down and use the pump to drain it
many thanks

Elluzion · Sep 26, 2007

Here is a T-Line Plug:

http://www.petrastechshop.com/dadentuplf1i.html

Go to petratechshop.com
Then go under watercooling. There is some good stuff!

Hope this helped

Mustanley · Sep 26, 2007

Wine bottle stoppers work well too and there's a good chance you can one locally for a dollar or two.

http://www.wineenthusiast.com/E/det.../743&uid=5A5F04E8-37A9-456E-BCE7-FCB444517A1C

Elluzion · Sep 26, 2007

^haha yeah probably would work.

CGR · Sep 26, 2007

I cut a large plastic bolt to fit in the top. Lets me screw it in for a nice tight seal.

woppy1 · Sep 26, 2007

i have just tried an aa battery which seems to work well lol

Drinkyoghurt · Sep 26, 2007

battery and water = a nono for me

i used a plastic cap of a marker and taped it in with some teflon tape, it looks dumb but it does the trick

Diggrr · Sep 26, 2007

In my first water system years ago, I had a t-line.
I used a brass barb with 1/2" male threads.
I drilled a hole in the top of the case to fit it through.
I found an electrical nut (the kind that secures those cable clamps to electrical boxes) fits those threads well enough to secure the barb in the hole.
Then I just used a 1/2" NPT brass cap on the top.

One sealed filler hole, much like DangerDen's fill port, but all brass. :thup:

t line

woppy1

Member

Elluzion

Member

Mustanley

Member

Elluzion

Member

CGR

Member

woppy1

Member

Drinkyoghurt

Member

Diggrr

Underwater Senior Member

Similar threads