PDA

View Full Version : Woot! Got my new CPU

svirfnebli
09-27-07, 10:41 AM
After a power surge fried my D975XBX board, I went to frys yesterday and bought a IP35 and Q6600. Fry's has been selling out of the Q6600 so all they have is fresh CPU's from intel.. I got me a SLACR!

After a day from hell at work, I bought my new parts home. I lapped the CPU (using a piece of glass from a picture frame) and started with 1000 grit, and finished with 2000 Grit. I didnt go all the way to the copper in the IHS, as it was actually very flat. Then I put on the artic silver and spread it with a credit card. This was the first time i hadnt lathered the stuff on. I just a small amount on and spread it as thin as possible (adding a dab here and there to get coverage). Then I lapped the bottom of my water block too just to be safe.

I only had time to turn the machine on and so far no problems! I cant wait to get vista loaded tweak this bad boy.

Thanks for sharing in my excitment.

svirf
Immortal_Hero
09-27-07, 11:47 AM
You lapped it before trying it out????????!!!!!!??????? That was brave!
svirfnebli
09-27-07, 12:43 PM
You lapped it before trying it out????????!!!!!!??????? That was brave!

I prefer to call it stupid. :>
CGR
09-27-07, 01:24 PM
Wow... little over anxious there i think. :)
jmorgan
09-27-07, 01:35 PM
I did it too, why not its out and you dont have to take anything apart

The chances of a dead brand new cpu are like 0, I have never heard of anyone that had a completely dead cpu that was brand new
GTengineer
09-27-07, 01:43 PM
I did it too, why not its out and you dont have to take anything apart

The chances of a dead brand new cpu are like 0, I have never heard of anyone that had a completely dead cpu that was brand new

if you happen to be in the 0.001% that receives that bad cpu, you will change your tune real fast after dumping $300 down the drain before even putting it in the system. Not to mention that you will never know if you were the one that screwed it up while lapping or if it came DOA and learn from your mistake for next time you do it.
CGR
09-27-07, 01:53 PM
I did it too, why not its out and you dont have to take anything apart

The chances of a dead brand new cpu are like 0, I have never heard of anyone that had a completely dead cpu that was brand new

Chances are much higher than you think.
Immortal_Hero
09-27-07, 02:05 PM
Chances are much higher than you think.

+1,000,000,000
drotto25
09-27-07, 05:39 PM
I had a brand new cpu that was doa with a AMD 2600+, so it can happen.
jmorgan
09-27-07, 06:14 PM
I guess I didnt screw it up it only does 3.7 24/7 Still have never heard someone get a brand new dud C2D. Quality control is way better now then 3+ years ago. Hottest core run 50c.
Elluzion
09-27-07, 06:19 PM
Is there a full picture guide on lapping CPU's and or waterblocks/heatsinks?

Nice, Yeah you sound pretty excited. I would be too!!!