PD805 @ 3.8Ghz high temps...

[qdubbs]

ok im going nuts here

PD 805 @ 3.8Ghz 1.53v
also its stable at 3.8 but no matter what i do i cant get even 1Mhz higher FSB or i get a BSOD

I got MCP655
Apogee GT Bowed
and this heater core from some russian car:
http://la.gg/upl/DSC00043_2.jpg
Pump is running at 13.8v
and some crap 120mm fan at 18v pulling thru the rad

cooling just the CPU



I redid the water cooling 5-6 times and no matter what i do my idle temp is 37c and Load 54c... room temp is 25c
pump works just fine, nothing clogged, tubes are fine.... i opened the water block to see if its not clogged or something....
Is it just that the rad is crap or i need a better fan? Or maybe those temps are normal for the POS CPU(lol)?

Also the thing was running at 3.7Ghz 1.47v 69c with a Zalman CNPS9700 cooler before that

[JamesXP]

Your gonna want a shroud and a better fan ;)

[qdubbs]

yeah i did make a shroud...

[qdubbs]

is it possible that IHS doesnt make good contact with cores?

[qdubbs]

well i made a big ass bong cooler just to see what will happen and i get 4-5c lower...

Rad - 37 idle 54 load
Bong - 33 idle and 49 load

:|

[qdubbs]

lol... no replies

anyway i'll be getting a Quad core soon
and i'll try to remove the IHS from the PD805. I know i'll prolly just kill it but what the hell
its 2 cores 2 dies right? Not 2 cores on 1 die?

[bing]

lol... no replies

anyway i'll be getting a Quad core soon
and i'll try to remove the IHS from the PD805. I know i'll prolly just kill it but what the hell
its 2 cores 2 dies right? Not 2 cores on 1 die?

It will probably looks like this. ;)

Not mine though, grabbed it somewhere at the net.
60307

[Smitty1258]

ummm, cooked! lol