Bum XP1600+

[FullOfSlack]

I have a bum XP 1600+, the fastest I can get it to run is 1533 stable. It will boot into windows at 1.6 but is not stable. Tried the volt mod, and did not help. Any suggestions?
Also what can I do to make my mobo more stable at higher FBS, anything over 133 and it gets agp related reboots. I have a Geforce3 Ti200 @ 220/500 and I even turned it back to stock and it was not stable above 133.

[Eliminator]

For starters,

Do you have just one stick of ram? If not, try using just one. Also, try different dimm's. Raising your Vdimm may help too. Just make sure your ddr can handle it.

There are lots of other things, too. NIC's seem to be the culprit a lot of the time.

[FullOfSlack]

I have 2 256MB Micron DDRs. My NICs have run at 146FBS no problems before. And I have the volts up to 2.7 (the most my AK31 will let me without mod)

[Eliminator]

Well, try just one stick on ddr. Also, try different dimm slots, too!