what temp is danger to p111 celeron 2 800mhz

[Colin Mc Donald]

temp: MBM5 says 32.c sandra says 36.c ??????


overclocking p111 celeron 2 from 800/100 fsb to112fsb @896
1.73-1.75 voltage

running .....SANDRA burn in,

I want to overclock to 1.Gig safely???

Subject = bios upgrade from award 4.60 pgma to????


Model = ax6bc R2.30 Mar.22.199 Aopen Inc
Serial number = 03/22/1999-i440BX-000000006C-00
Part number = I don’t see it
------------------------------------
OS & Version = WIN 98
CPU Type = p!!! Celeron 2 800
Motherboard = Aopen AX6BC
BIOS/Firmware = Award Software International
Memory size = Intel Corporation 82443BX/ZX 440BX/ZX
IDE 1 Channel = master 20 gig
Slave 1 gig
IDE 2 Channel = sec master CD-ROM 52x creative
Sec slave CD rw compact 48x12x8x
AGP slot = Ati128Rage 128 GL SD AGP 32meg ram
PCI slot = pci 32bit 5v full length in use (ensonique (creative) creative
Soundblaster audiopci 128)
32 bit...in use (gvc corporation 56k winmodem)
Pci. 32 bit...available
Pci. 32 bit...available
Pci. 32 bit in use (D-link INC. DE Ethernet Adapter
ISA slot = ISA 16 bit 5v full length available
ISA 16 bit 5v full length available
Problem description = want to upgrade bios then maybe overclock

[funnyperson1]

that is a very good temp, i wouldnt be worried unless it went over 45......geep clocking, that celly should be a beauty(most of them were...;) )

[CrystalMethod]

You should be able to push 1000Mhz with your setup, but watch your temps like a hawk, I'm not so sure about the capabilities of that particular board. As far as I know that motherboard has been discontinued by AOpen. You can get the latest BIOS by clicking here. (http://www.aopen.com/scripts/util/ftplist.asp?pub/bios/ax6bc/ax6bc255.zip)

This is V2.55, it fixes a whole lot of things.

[slim_lim]

Intel lists max operating temperature for Celeron 800 at 80.c so you're perfectly safe at 32-36! As long as it is the CPU temperature we are talking of course, not the ambient. Ambient should not go above 45.c. http://support.intel.com/support/processors/celeron/24767.htm

[Colin Mc Donald]

I went up to 124 fbs@ 996 and temp went to below o -0c lol fan stopped according to MBM5
so I am now doing a burn in at 117.29 and seems fine at 935mhz 32 deg c,,,1.69v fan 4615-4800 rpm

thanx

[Yodums]

Originally posted by Colin Mc Donald
I went up to 124 fbs@ 996 and temp went to below o -0c lol fan stopped according to MBM5
so I am now doing a burn in at 117.29 and seems fine at 935mhz 32 deg c,,,1.69v fan 4615-4800 rpm

thanx

Did the fan actually stop or something? If it did plug that sucker out...

You can hit more you know just that its going to need some cooling and abit of vcore adjustments and a little bit of luck since those Celeron 800 series are a beauty.

[Colin Mc Donald]

fan did not! stop it was program (MBM5) reporting that fan stopped, volts 0 and temp -119c IT is a demo version so I am thinking it may cut out after a certain time.
I reboot and all was normal,,,,has anyone ran into this problem????

tx in advance
Colin
NOW @ 980mhz 32deg c, voltage 1.73,

[Colin Mc Donald]

fan did not! stop it was program (MBM5) reporting that fan stopped, volts 0 and temp -119c IT is a demo version so I am thinking it may cut out after a certain time.
I reboot and all was normal,,,,has anyone ran into this problem????

tx in advance
Colin

NOW @ 980mhz 124 fbs,,,, 32deg c,,,, voltage 1.73,




Model = ax6bc R2.30 Mar.22.199 Aopen Inc
Serial number = 03/22/1999-i440BX-000000006C-00
Part number = I don’t see it
------------------------------------
OS & Version = WIN 98
CPU Type = p!!! Celeron 2 800
Motherboard = Aopen AX6BC
BIOS/Firmware = Award Software International
Memory size = Intel Corporation 82443BX/ZX 440BX/ZX
IDE 1 Channel = master 20 gig
Slave 1 gig
IDE 2 Channel = sec master CD-ROM 52x creative
Sec slave CD rw compact 48x12x8x
AGP slot = Ati128Rage 128 GL SD AGP 32meg ram
PCI slot = pci 32bit 5v full length in use (ensonique (creative) creative
Soundblaster audiopci 128)
32 bit...in use (gvc corporation 56k winmodem)
Pci. 32 bit...available
Pci. 32 bit...available
Pci. 32 bit in use (D-link INC. DE Ethernet Adapter
ISA slot = ISA 16 bit 5v full length available
ISA 16 bit 5v full length available
Problem description = want to upgrade bios then maybe overclock

[Yodums]

Originally posted by Colin Mc Donald
fan did not! stop it was program (MBM5) reporting that fan stopped, volts 0 and temp -119c IT is a demo version so I am thinking it may cut out after a certain time.
I reboot and all was normal,,,,has anyone ran into this problem????

tx in advance
Colin

NOW @ 980mhz 124 fbs,,,, 32deg c,,,, voltage 1.73,




Model = ax6bc R2.30 Mar.22.199 Aopen Inc
Serial number = 03/22/1999-i440BX-000000006C-00
Part number = I don’t see it
------------------------------------
OS & Version = WIN 98
CPU Type = p!!! Celeron 2 800
Motherboard = Aopen AX6BC
BIOS/Firmware = Award Software International
Memory size = Intel Corporation 82443BX/ZX 440BX/ZX
IDE 1 Channel = master 20 gig
Slave 1 gig
IDE 2 Channel = sec master CD-ROM 52x creative
Sec slave CD rw compact 48x12x8x
AGP slot = Ati128Rage 128 GL SD AGP 32meg ram
PCI slot = pci 32bit 5v full length in use (ensonique (creative) creative
Soundblaster audiopci 128)
32 bit...in use (gvc corporation 56k winmodem)
Pci. 32 bit...available
Pci. 32 bit...available
Pci. 32 bit in use (D-link INC. DE Ethernet Adapter
ISA slot = ISA 16 bit 5v full length available
ISA 16 bit 5v full length available
Problem description = want to upgrade bios then maybe overclock

Sweet although you can probably pump more into that thing by upping some more since temperature in your case is not a problem. Although I don't know much about your motherboard I think it should do a fine job of overclocking as it is right now.

What heatsink fan are you using?

By the way I add you know you can go to User CP button above you and Edit Profile and add a signature it doesn't have to be done manually.

Looking at your sig I noticed it said p!!! Celeron
It is only a Celeron II and P3 and Celeron's are completely different chips.

[Colin Mc Donald]

HSF=intel A22835-001
070106a
109x6512h1186
DC12V/0.06A

I think all is well may just be happy at 980mhz

tx

[Yodums]

Originally posted by Colin Mc Donald
HSF=intel A22835-001
070106a
109x6512h1186
DC12V/0.06A

I think all is well may just be happy at 980mhz

tx

I see your in Ontario as well. I'm in Ottawa.

Anyways, usually overclockers have a syndrome so they try to get the best out of them.

People will go from lapping heatsinks, lapping core, to burn-ins and trying to get that "extra" and sometimes corrupting their window files.

hehe

[Colin Mc Donald]

do you think HSF is adequate???

Colin

[Yodums]

Originally posted by Colin Mc Donald
do you think HSF is adequate???

Colin

Well if your temperatures are correct which I think they are.

Then really you don't need one. As long as you don't exceed a 45-50 Celius full load temperature.