• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Overclocking Question

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

colt1911

Registered
Joined
Nov 15, 2007
Location
Tennessee, USA
Yes I new to this so please bare with my dumb questions. I have a P5N32-E Sli board with the E6850 cpu.I have my memory voltage set to 2.0, and my timings set to 4-4-4-12 2T. I set my AI tuner to manual and the FSB clock mode to unlinked. I change the fsb from 1333 to 1433 and notice that the memory drops from 800. Everything boots up fine and I'm at about 3.2 ghz. If I go higher say 1533 when my system reboots I get a long beep and have to restart my pc and press F1 to load defaults. I guess what I'm trying to ask is there something I'm not doing right or do I need to change some more settings? Thanks guys for the help.
 
You need to take it abit slower work you way up from a lower clock.

Monitor temperatures (core temp or S.I.V.)
touch test your north bridge and southbridges.
Check your memory specs on your manufactures web site cause I think your off abit on voltage.
Run Prime95 or Orthus to test and only adjust voltages if it becomes unstable.

Have fun!

Gaucho
 
Back