anyone elses work just sitting in a queue??? or just me??

[sifu quoc]

Folding@Home2 Core Shutdown: FINISHED_UNIT
CoreStatus = 64 (100)
Sending work to server

+ Attempting to send results
- Connecting to server (171.64.122.112)
- Error: Could not transmit unit 04. Keeping unit in queue.

+ Attempting to send results
- Connecting to server (171.64.122.111)
- Error: Could not transmit unit 03. Keeping unit in queue.

+ Attempting to send results
- Connecting to server (171.64.122.112)
- Error: Could not transmit unit 04. Keeping unit in queue.

+ Attempting to send results
- Connecting to server (171.64.122.95)
- Error: Could not transmit unit 05. Keeping unit in queue.

+ Attempting to send results
- Connecting to server (171.64.122.111)
- Error: Could not transmit unit 06. Keeping unit in queue.

+ Attempting to send results
- Connecting to server (171.64.122.115)
- Error: Could not transmit unit 08. Keeping unit in queue.
+ Attempting to get work packet
- Connecting to assignment server
- Successful: assigned to (171.64.122.112).
+ News From Folding@Home: Welcome to 2.0
+ Closed connections

[S_Wilson]

I noticed one of my machines sat idle for 35 minutes until about 10am MST. It is folding again so maybe the server was down.

[JetMech]

I had a situation where my system could go out and get work but neither send work nor go onto the internet. My other machines connected to the same router had no problem. This lasted about two days and suddenly the queue dumped and internet service returned. I've started just ignoring some of the quirky problems with folding and have saved a lot of troubleshooting time.

[SickBoy]

I had this problem when my boxes were at school..... now that I am on a DSL line at home, I don't have problems anymore. Don't really know a fix for it.....

SB

[hooziewhatsit]

does anyone know if there's a way to type in a command to make the core send the units? I know there was a way with the old version...


fold on!

[Ploaf]

Originally posted by hooziewhatsit
does anyone know if there's a way to type in a command to make the core send the units? I know there was a way with the old version...


fold on!

There is a command flag with the text version. It is "-send". You can use "-send all" or -send 1 (maybe 01 can't remember). -send all works though because I used it a few days ago to send in 3 wu's that were in queue.
Here's a screenshot with a list of the command flags available. If it shows up as unreadable I have the full size pic or can reproduce it.

[res0r9lm]

Originally posted by JetMech
I had a situation where my system could go out and get work but neither send work nor go onto the internet. My other machines connected to the same router had no problem. This lasted about two days and suddenly the queue dumped and internet service returned. I've started just ignoring some of the quirky problems with folding and have saved a lot of troubleshooting time.

I had the same problem thought it was my network card,so I restarted my system and everything was fine