PDA

View Full Version : Athlon XP and SSE


plague
12-24-01, 06:05 PM
Ok, I know I need to reinstall windows when I put my XP 1600 in, my question is: Can I just run the install, or do I have to reformat AND reinstall. I just did this not too long ago, and I'd like to avoid it if possible, so anyone know if just running windows 98 setup would enable the SSE instructions on my new XP??

minoukat
12-24-01, 06:21 PM
I don't know the answer, as I didn't upgrade my CPU yet, but I suggest you just try it, as it should redetect every new hardware in your comp, reinstall every driver and everything

Fiz
12-24-01, 08:42 PM
Try it both ways, first just reinstall it, check with wcpuid, it will tell you whether or not SSE is enabled. If it doesn't work you will have to format.

Fiz

plague
12-24-01, 09:17 PM
thanks for the replies, thats what I figured I'd do.

Ozzman
12-24-01, 11:52 PM
umm just do a format c: /q

that should make the format MUCH faster..

Luie
12-25-01, 08:34 AM
What is the difference in quick format and normal format?
Do they both format the drive completely?

wolfsid
12-25-01, 10:11 AM
Originally posted by luie
What is the difference in quick format and normal format?
Do they both format the drive completely?


Why don't you try wcpuid and turn it on in there... worked or me...


MARRY CHRISTMAS ALL :beer:

dolemitecomputer
12-25-01, 11:43 AM
Reinstalling windows won't enable SSE instructions because that is a hardware feature. Try using WCPUID first and see if it is not enabled then try updating your BIOS. From what I know if the BIOS does not support it then SSE instructions will not be enabled.

wolfsid
12-25-01, 12:57 PM
Originally posted by dolemitecomputer
Reinstalling windows won't enable SSE instructions because that is a hardware feature. Try using WCPUID first and see if it is not enabled then try updating your BIOS. From what I know if the BIOS does not support it then SSE instructions will not be enabled.


you can enable it tru wpcuid but some systems i have seen crash when turned on ..

The Coolest
12-25-01, 02:22 PM
Originally posted by luie
What is the difference in quick format and normal format?
Do they both format the drive completely?

The quick format just erases everything from, your drive, & u can use unformat to restore ( I think ). Full Format (the normal 1) will whipe all info off the drive and check for bad blocks... that's basicly it. the quick finishes in couple of secs, the full can format much, much longer, depends on the size of the drive

Luie
12-25-01, 09:18 PM
thanks,
so fast format is better because you can restore and is faster to format.

am i right?

plague
12-25-01, 10:26 PM
I'm not worried about the time it takes, as i have a windows partition that is only 2.5 gigs, formats very quickly. I just read that in order to enable SSE, windows had to be reinstalled when you switched chips.

wolfsid
01-21-02, 08:34 PM
Originally posted by plague
I'm not worried about the time it takes, as i have a windows partition that is only 2.5 gigs, formats very quickly. I just read that in order to enable SSE, windows had to be reinstalled when you switched chips.


Problem trying to runn sse on a asus a7a266 rev 1.10 board anyone else have this problem... I formated and installed os severial times and it just wont run in sse... HELP:D

wolfsid
01-24-02, 10:32 PM
Originally posted by wolfsid



Problem trying to runn sse on a asus a7a266 rev 1.10 board anyone else have this problem... I formated and installed os severial times and it just wont run in sse... HELP:D

OK people here is a little snapshot of processor and no sse whats up with that i reinstall windows a couply of times no help and i have no clue what to do i upgrade the bios and i have everthing set right i think :eh?: . Well someone needs to get back to me on this cuz i thought that sse is what make the xp so nice what the hell.:confused: