Bridges on Duron

[TripleH]

Does anyone have a link to the site where you can change the default multiplier by connecting certain bridges?, My mobo has no multiplier options or fsb

[dolemitecomputer]

No jumpers either? If you can't change even the front side bus I would suggest upgrading your motherboard. If you are using the older Duron then you connect the "level 1" bridges with a pencil. The graphite is conductive and allows you to change the multiplier.

[TripleH]

Apparently you aren't trying to undrstand the question. I was asking how to change the default multiplier, not how to unlock the multiplier

[dolemitecomputer]

Ok. Now I understand. From what I have seen I don't think that's possible but I will see what I can find out.

[dolemitecomputer]

This might help. I found an old article that shows what most the the bridges mean on Toms Hardware. Hope this helps:

Athlon Guide (http://www6.tomshardware.com/cpu/00q3/000711/index.html)

[Tiger]

You'll find the answer here.
http://www.anandtech.com/guides/showdoc.html?i=1345 and here more specifically on the L6, L3 & L4
http://www6.tomshardware.com/cpu/00q3/000711/amd-04.html
Depending on your chip and what multiplier you want to achieve you might have to cut a bridge which is not that easy.