Need Help OC MSI P6N SLI FI - C2D E6550 - Kingstone PC5300

Brothers & Sisters,

I need help to guide me OC my C2D E6550 on MSI P6N SLI FI board. Currently i am using Kingston PC5300 5-5-5-15 2T value RAM, Standard Heatsink & PSU.

I am going to overclock it to 3.5GHz. is it possible? Need your guide.

Terima Kasih (Indonesian language for Thank You)

Best regards,
Abang_apy

3.5 is really hard to do with stock cooling and 7x multi.
a more realistic goal would be 3.0

Yes that will be fine. Could you give me guidance.

Actually i already OC my rig. but it only reach 2.65 GHz.

My Bios Version 2.4 settings are as follows:

CPU FEATURE:

-Execute Disable Bit Disabled
-Set Limit CPUID Disabled
-C1E Disabled

CHIPSET FEATURE:

HPET Disabled

CELL MENU:

D.O.T Control Disabled
INTEL EIST Disabled
System Clock Mode Manual
FSB Clock (in my case, 1500mhz)
Mem Clock (in my case, 750mhz) pc-5300
CPU ratio (in my case, 7 ) E6550cpu

Advanced DRAM your memory settings

Adjust PCIE 100

CPU Voltage Auto
Mem Voltage 1.8v
NB Voltage 1.40v
SB Voltage 1.50v
FSB VTT Voltage 0%
Spread Spectrum
Configuration All set to Disabled

But all above config only reach 2.65GHz not more

Could you help me?

Thank you